Quick Start Manual

- 34 -
Initial Setup for Faxing
3
Faxing (For MB451, MB451w, MB471, MB471w, MB491, ES4191 MFP only)
a Press , , , to select the
character you want, and then
press
OK
.
- The selected character is entered as “*” in
the text eld.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b Repeat step a until all characters
required are entered.
c Press the and to select [Enter]
and press
OK
.
4 Press the to select [Fax Setting] and
then press the .
Note
● When the FaxServer Function is enabled, [Fax
Setting] is not displayed on the [Easy Setup]
menu. In this case, set [FaxServer Function]
to [OFF]. For details, refer to the User’s Manual
(Advanced) > “2. Faxing” > “Scan To FaxServer” >
“Enabling the Scan To FaxServer function”.
5 Press to select the [Fax Number]
entry box.
6 Enter the fax number of your machine
with the ten-key pad.
7 Check that [Enter] is selected and then
press
OK
.
8 Press to select the [Sender ID] entry
box.
9 Enter an arbitrary sender name up to 22
characters allowed.
10 Press the and to select [Enter] and
then press
OK
.
The message showing that fax setting is complete
appears.
11 When the setup menu screen is
displayed, press to complete the
setup.
12 For the conrmation message, check
that [Yes] is selected and press
OK
.