Quick Start Manual

ManualsBrandsOki ManualsRoutersOki MB451wMFP

- 29 -

Initial Setup for Faxing

Faxing (For MB451, MB451w, MB471, MB471w, MB491, ES4191 MFP only)

Connecting to an ADSL Environment

Note

● Do not connect with USB cable or LAN cable at this point.

First, check that the machine is turned off. If

the machine is turned on, hold down the power

switch for approximately one second to turn off

the power.

Plug the [Telephone cable] connected to the

ADSL modem into the [LINE connection] of

your machine.

Remove the telephone connector cover.

Plug the external telephone’s cable into the [TEL

connection] of your machine.

LINE connection

Telephone cable

Public Line

(Analog)

TEL connection

Splitter

ADSL modem

Memo

● Check the dial tone detection if it is unable to dial. Refer

to the User’s Manual (Advanced) > “6. Conguring at the

Operator Panel” > “List of the Device Setting Menu Items”

> “List of Each Setup Menu” > “Admin Setup” > “User

Install”.

● If you cannot send or receive faxes very well, set [Super

G3] to [OFF]. Refer to “Step 3-5 Setting for Super G3”

P.36 in detail.

Connecting to an IP Telephone

Note

● Do not connect with USB cable or LAN cable at this point.

First, check that the machine is turned off. If

the machine is turned on, hold down the power

switch for approximately one second to turn off

the power.

Plug the

[Telephone cable] connected to the

IP telephone into the [LINE connection] of

your machine.

Remove the telephone connector cover.

Plug the external telephone’s cable into the

[TEL connection] of your machine.

LINE connection

Telephone cable

TEL connection

Optical IP telephone

Corresponding

telephone

LAN

cable

Optical cable

Optical Network

Unit (ONU)

*Insert into the

telephone cable jack.