Quick Start Manual

- 20 -
Installing Your Machine
1
Machine Setup
Loading Paper
Your machine has two built-in trays (tray 1 and MP tray) (MB441/MB461/ES4161 MFP is a Manual
Feeder) and an optional tray (tray 2).
The Optional tray (Tray2) is only available on MB461, MB471, MB471w, MB491, ES4161 MFP, and
ES4191 MP.
This section explains the supported paper and capacity of tray 1 and how to load paper into the tray 1.
After you load paper, you need to register the loaded paper on your machine.
To complete the loading procedures, follow the 2 steps below:
● “Step 1 Loading Paper into Tray 1” P.20
● “Step 2 Conguring the Settings for Tray 1” P.21
 Tray 1 Specication
Supported paper size Paper capacity Paper weight
● A4
● A5*
● B5
● A6*
● Letter
● Legal 13
● Legal 13.5
● Legal 14
● Executive
● Statement*
● 16K (184 x 260 mm)
● 16K (195 x 270 mm)
● 16K (197 x 273 mm)
● Custom
250 sheets
(when paper weight is 80 g/m
2
)
● Light
60 to 63 g/m
2
(16 to 17 lb)
● Medium Light
64 to 74 g/m
2
(18 to 19 lb)
● Medium
75 to 87 g/m
2
(20 to 23 lb)
● Medium Heavy
88 to 104 g/m
2
(24 to 27 lb)
● Heavy
105 to 122 g/m
2
(28 to 32 lb)
Note
● Duplex printing cannot be performed on paper marked with “*”.
Reference
● For the specications and how to load paper in tray 2 (optional), MP tray, and manual feeder, refer to the User’s Manual
(Basic) > “1. Setup” > “Loading Paper and Documents” > “Paper” > “Loading Paper”.
Step 1 Loading Paper into Tray 1
1 Pull out tray 1.
2 Slide the paper guide (1) to the width of
the paper to be loaded.
1