LED Printer User Manual
Table Of Contents
- Contents
- Features
- Consumables
- Options
- Operating Your Printer
- Using the Front Operator Panel
- OKIPAGE 10e Front Operator Panel Reference
- OKIPAGE 10e Function Reference
- Changing the Menu Settings
- Using the Printer Menu Setup
- Resetting the Menu
- Using Power Save to Minimize Warm-up Time
- Printing the Menu
- Maintenance Menu
- Using Special Print Media
- Printing a Special Document
- Enhancing Print Quality
- Printing Envelopes
- Selecting Envelopes
- Printing Transparencies and Adhesive Labels
- Guidelines for Transparencies and Labels
- Using Recycled Print Media
- Printer Maintenance
- Replacing The Toner Cartridge
- Replacing the Image Drum Cartridge
- Cleaning the LED Array
- Printing a Cleaning Page
- Problem Solving
- Clearing Paper Jams
- Print Quality Problems
- Software Problems
- Hardware Problems
- Service and Support
- OKIDATA ONLINE
- Your Dealer
- The Okidata Customer Support Center
- Okidata Customer Service Representatives
- Purchasing Supplies
- Warranty Service
- OKIDATA SERVICE CENTERS
- Index
- Index
E-34
Symptom: Pages curl excessively
Problem: Printing on wrong side of paper. High
humidity.
Solution: Turn paper over in tray. Note arrow on paper
package. Install paper print side down in tray.
Problem: Moisture in paper. Improper storage.
Solution: Avoid storing paper in areas of excessive
temperature changes and humidity.
Problem: High Humidity.
Solution: Recommended operating humidity: 20-80%
Software Problems
Software controls printing features. Make sure you have
selected the correct printer driver in your software. See
your software application documentation for more
information.
Symptom: Status Monitor displays Checking Status
indefinitely. The Printer Menu button is greyed and
not active.
Problem: Bi-directional communication is not being
achieved through the printer port.
Solution: Check cable for IEEE 1284. Verify PC is set for
bi-directional printing. Remove any previously-
installed printer software that may cause conflict.
Symptom: Blank pages appear between printed pages.
Problem: Number of lines per page in software is not
equal to number of lines per page of printer.
Solution: Many software packages assume 66 lines per
page; your printer default is 60. Adjust software
accordingly, or set LINES/Pg in Menu 1 to equal lines
per page in software.