Printer User Manual
Table Of Contents
- 6020e_4.pdf
- In This Section
- Chapter 1Introduction
- Overview
- Software Requirements
- Network Preparation
- Before You Start
- Overview of TCP/IP Configuration
- Chapter 2 Configuring the OkiLAN 6020e
- Choosing an IP Address
- Configuring the OkiLAN 6020e
- Assigning the IP Address
- Other Utilities
- Verifying Access to the OkiLAN 6020e
- Chapter 3 TCP/IP Configuration and Printing
- Overview
- Configuring for TCP/IP Network Printing
- Remote Print Queue Name
- Configuring a BSD-Style Print Queue
- Remote LPD Printing
- FTP Printing
- Timeout Checking
- Raw Port Printing
- Chapter 4 OkiNet for TCP/IP
- Overview
- System Requirements
- Running OkiNet for TCP/IP
- Configuring the OkiLAN 6020e Using OkiNet for TCP/IP
- Configuring TCP/IP Options
- EtherTalk Configuration Options
- Output Port Configuration Options
- SNMP Configuration Options
- Enabling/Disabling Protocols
- SNMP Trap Configuration
- Saving the Configuration
- Displaying OkiLAN 6020e Diagnostic Information
- Printing a Configuration Sheet
- Resetting the OkiLAN 6020e
- Restoring Factory Default Settings
- Creating Customized Views
- Modifying View Settings
- Permanently Defining SNMP Access Information
- Configuring the Discovery UDP Port Number
- Starting a Telnet Session
- Starting the BOOTP Server
- Chapter 5 Web Configuration
- Chapter 6 Telnet Configuration
- Overview
- Running a Telnet Session
- Appendix A Troubleshooting
- Main Status Indicator
- Restoring the OkiLAN 6020e to Factory Defaults
- Unable to Assign IP Address
- Hardware Error Messages
- Printing a Configuration Page
- Unable to Print
- Appendix B Application Considerations
- Overview
- Assigning the OkiLAN 6020e IP Address with BOOTP
- Configuring the OkiLAN 6020e IP Address with RARP
- Configuring HP-UX v8.07 for Printing with the OkiLAN 6020e
- Configuring HP-UX v9.xx for Printing with the OkiLAN 6020e
- Configuring HP-UX v10.xx for Printing with the OkiLAN 6020e
- Configuring SCO UNIX for Printing with the OkiLAN 6020e
- IBM's AIX ver. 3.x for Printing with the OkiLAN 6020e
- Configuring Solaris 2.x for Printing with the OkiLAN 6020e
- Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing with the OkiLAN 6020e
- Appendix C Internet Printing Protocol (IPP)
Index - 5
Index
OKI OkiLAN 6020e User’s Guide
Index
S
SCO UNIX Application
prerequisites, IV-73
procedure, IV-74
Security in SNMP, II-5
Selecting a Zone in EtherTalk,
VII-5
Selecting Your Printer in
EtherTalk, VII-13 to VII-14
Set Community Name in
TCP/IP, IV-31
SNMP
configuration options,
OkiNet for TCP/IP, IV-30
to IV-31
private MIB, II-3 to II-4
traps, II-4 to II-5
Solaris 2.x Application
prerequisites, IV-78
procedure, IV-78
Static Route Entry
assigning an IP address,
IV-11
troubleshooting, IV-52
Sun-OS v4.1.x Application
prerequisites, IV-79 to IV-80
procedure, IV-80
T
TCP/IP
configuration overview,
IV-5
network printing, configur-
ing for, IV-15
OkiLAN 6020e connect for
TCP/IP, VIII-4 to VIII-6
Telnet Session
configuring port informa-
tion, IV-46 to IV-47
identifying default gateway
IP address, IV-46
running, IV-43
specifying print server IP
address, IV-45
specifying the subnet mask
for your network, IV-45
starting, IV-41
Timeout Checking, IV-21
Trap Community Name in
TCP/IP, IV-31
Trap Destination in TCP/IP,
IV-33
Traps, SNMP, II-4 to II-5
configuration, III-15 to
III-16
Troubleshooting
EtherTalk
Macintosh chooser, VII-8
network error messages,
VII-10
OkiLAN 6020e utility,
VII-10 to VII-11
unable to print, VII-9 to
VII-10
LAN Manager/LAN Server
no configuration sheet,
VI-17
unable to print, VI-17
TCP/IP
BOOTP, IV-50
FTP, IV-55
gleaning, IV-50
hardware error messages,
IV-53
OkiNet for TCP/IP utility,
IV-53
RARP, IV-50