Printer User Manual

V - 14
Section 5 - Chapter 4 - Additional Utility Features
OKI OkiLAN 6020e User’s Guide
3. From the Configure menu, select Configure Print
Server. The following screen will display:
The OkiLAN 6020e will reset by selecting OK to save
any of the options, except the Print Configuration
Sheet option.
Configuring Parallel Port P1
Ports P1 must be configured based on the printer you
intend to use.
1. From the Configure Print Server window, choose a
print server from the list at left.
2. Select Parallel Port-P1 from the list at right and
then click the Configure button.
3. Click OK when you have selected the appropriate
settings. The configuration settings will be stored in
the OkiLAN 6020e and will be retained even when
the OkiLAN 6020e is powered off.
CAUTION: If you change the configuration while a
job is printing, the job may not print successfully.
Configuration option for parallel Port P1 and P2:
• Configuration page print language - The factory
default is TEXT. If your OkiLAN 6020e is attached
to a PostScript or PCL printer, enable the appropriate
selection. The OkiLAN 6020e configuration sheet
will be printed in the language you select. This
setting only affects the configuration sheet, not other
print jobs.