Printer User Manual

IV - 31
Section 4 - Chapter 4 - OkiNet for TCP/IP
OKI OkiLAN 6020e User’s Guide
TCP/IP
System Contact
Enter any information useful to a user if problems with
the OkiLAN 6020e arise.
System Location
Enter a description of the OkiLAN 6020e location.
Get Community Name
This field is used to set the community name required
to Get information from the print server. The default
community name is public.
Note: For JetAdmin to function correctly with the
OkiLAN 6020e, the SNMP Get and Set
community name must be set to public.
Set Community Name
This field sets the community name required to Set
information on the OkiLAN 6020e. The default
community name is public.
Note: The OkiLAN 6020e cannot be configured
without the correct Set community name. To
secure the configuration of the OkiLAN 6020e,
change the community name from the default
setting.
Trap Community Name
Enter the community name which will be used when
traps are sent from the OkiLAN 6020e. This setting
allows trap utilities to only accept traps from devices
with appropriate community names.
The trap community name field is used by the OkiNet
Alert and other network monitoring utilities for
grouping or filtering OkiLAN 6020e devices. OkiNet
Alert assists in managing network printers by
immediately alerting you of printer problems.