Operation Manual
- 92 -
Windows Utilities
4
4. Using Utility Software
Check the Free Space in SD Memory
Cards or Flash Memory
You can check the free space in SD memory
cards and ash memory.
1 Clicking a device name in the device
selection area at the bottom of the
Storage Manager Plug-in window opens
a device resource window of the selected
device.
2 The dialog box shows storage, partitions,
directories and les by communicating
with the device.
Delete Unwanted Jobs From an SD
Memory Card
You can delete print jobs in an SD memory
card’s [COMMON] partition.
Memo
● Even after a conrmatory printing or saving of print data,
as the job remains in the [COMMON] partition, if it is not
deleted the capacity of the SD card will decrease.
Note
● Encrypted authorized prints cannot be deleted on the
Storage Manager Plug-in.
1 Clicking icon, opens the Job
Management dialog.
2 To view a specic user’s print jobs, enter
the password and click on [Apply job
password].
To view all print jobs, enter the
administrator password and click on
[Apply administrator password].
“Administrator password” is the
password for administration of the
device.
3 Select the job you want to delete and
click icon.
4 Click on [OK].
PDF Print Direct
You can send a PDF le to the printer and print
it directly. With PDF Print Direct, the procedure
for opening PDF les with applications such as
Adobe Reader has been omitted.
Reference
● For how to install PDF Print Direct, please refer to
“Installing Utilities” P.86.
Printing a PDF le
1 Check that the [
Your Printer(*)
] icon
is in the [Devices and Printers] folder.
2 Right-click on the PDF you would like to
print, and select [PDF Print Direct].
A window is displayed.
3 Select the printer driver from [Select
Printer].
When setting the user verication function on the
selected printer driver, select [User Auth] from
the [Printer Settings] menu.
4 If you want to print an encrypted le,
put a check in [Set Password] and
enter the password.
In order to use the same password after this,
click on [Save Password].
5 Change the setting if necessary, and
click on [Print].