Extra Information

- 16 -
Printing with Various Functions
1
1. Convenient Print Functions
5 Select [All Pages From] and then
select [Multi Purpose Tray].
6 Congure other settings if necessary and
then start printing.
Memo
● If the print dialog does not contain the options you expect
to see, click the [Show Details] button at the bottom of
the dialog.
Printing on Custom Size Paper
You can register a customized paper size on the
printer driver so you can print on nonstandard
paper such as banners.
● Settable custom size range
Width: 76.2 to 216 mm
Length: 127 to 1321 mm
Paper sizes that can be fed differ depending on
the tray.
Note
● Register the paper size as portrait, and load paper in
portrait orientation.
● For banner media that is over 356 mm long, use the
faceup stacker.
● This function may not be available in some applications.
● If paper length exceeds 356 mm, we do not guarantee
print quality.
● If paper is so long that it exceeds the paper supports of
the MP Tray, support it by hand.
● When using tray 1 or tray 2/3/4, select the <ENTER>
button on the operator panel>[Menus]>
[Tray Conguration]>[Using Tray Cong]> [Paper
Size]>[Custom] before doing the following procedure.
● If images are not correctly printed on large size paper,
selecting [Normal(600x600dpi)] for [Print Quality],
image in the PS printer driver may allow for correct
printing.
● Use of paper with a width of less than 100 mm is not
recommended. It may cause paper jams.
Reference
● For details on the paper sizes that can be fed on each tray
or used for duplex printing, refer to the User’s Manual
(Setup).
● The [Auto Tray Change] is enabled by default. When
the tray runs out of paper during printing, the printer
automatically begins feeding paper from that tray. If you
want to feed custom paper only from a particular tray,
disable auto tray switching. For auto tray change, refer to
"Auto Tray Switching" P.32.
 Specifying Custom Sizes
To load custom size paper, you need to register
the width and length of the paper before
printing. The range of the sizes you can set
differs according to the paper tray.
Tray Available size range
Tray1 Width:
148 to 216 mm (5.8 to 8.5 inches)
Length:
210 to 356 mm (8.3 to 14.0 inches)
Tray2/3/4
(Option)
Width:
148 to 216 mm (5.8 to 8.5 inches)
Length:
210 to 356 mm (8.3 to 14.0 inches)