Operation Manual

Colour matching> 59
G RAPHIC PRO WORKFLOW – OVERVIEW
There are three steps to using the Graphic Pro colour matching
system:
1. Gather or create ICC profiles (see below)
2. Download ICC profiles to the printer hard disk (page 59)
3. Select the ICC profiles in the printer driver when printing
(page 61)
S TEP 1 - G ATHER OR CREATE THE ICC PROFILES
Where can I get the profiles I need?
S TEP 2 - D OWN LOADING ICC PROFILES TO THE PRINTER HARD DISK
You can download profiles to the printer hard disk using the
Profile Assistant utility.
NOTE:
A hard disk is required (option) if you wish to use this
function.
PROFILE TYPE WHERE TO GET PROFILES
RGB Source
(RGB Input)
Obtain your RGB source profiles from your scanner,
camera or monitor manufacturer.
CMYK
Simulation
(CMYK input)
Obtain the simulation profile from the manufacturer of the
printer you wish to simulate.
Printer
(CMYK Output)
The factory default profiles for your printer are built-in. If
you need greater accuracy, you should create your own
printer profile using third-party ICC profile creation
software.
Link Profile You can create Link profiles using third-party ICC profile
creation software.
Note that not all ICC profile creation software can create
Link profiles.