Operation Manual

A Guide to printing> 34
C ONFIGURING HARDWARE OPTIONS FROM THE DESKTOP
Use this method if you have a printer icon on your desktop.
1. Select the printer icon on the Desktop for your printer.
2. From the [Printing] menu, choose [Change Setup…].
3. In the [Change] menu, select the hardware item(s) that
you have installed, and change the [To] values as
appropriate.
4. Click [OK] to save your settings.
C ONFIGURING HARDWARE OPTIONS FROM CHOOSER
(A PPLE T ALK ONLY )
Use this method if you do not use Desktop Printing.
1. In the Apple menu, select [Chooser].
2. Select the printer driver that you use (LaserWriter or
AdobePS) in the left-hand side of the Chooser window.
3. If you are on a network with multiple AppleTalk zones,
select the appropriate zone for the printer in the bottom
left side of the Chooser.
4. If your network does not have multiple AppleTalk zones,
this option will not be visible.
5. Select the name of your printer in the right-hand side of
the Chooser.
6. Click [Setup…].
7. Click [Configure].
8. Make changes to the installed hardware options as
appropriate for your printer.
9. Click [OK], and close the Chooser window to save your
settings.
NOTE:
If your printer is connected via USB or AppleTalk, click the
[Auto Setup] button. This queries the printer, and sets the
options automatically.