Operation Manual

Control panel > 25
LCD PANEL MODES
The LCD panel can display the following:
> Status information
> Menu (functions) information
> Configuration information
> Help information
S TATUS INFORMATION
Status information is associated with three printer states:
In the Information state, such as idling or printing, the printer is able to process print
jobs.
In the Warning state, the printer has encountered some minor problem but is still able
to process print jobs.
In the Error state, the printer has encountered a problem and cannot continue
printing until the user has intervened and removed the cause of the trouble.
The top two lines of the display panel show the printer status. The bottom of the display
panel normally shows a bar chart of the toner usage.
M ENU ( FUNCTIONS ) INFORMATION
There are three types of menu (functions) information:
User menus: activated by pressing the Enter button, Up-arrow or Down-arrow
button on the control panel. These menus are available to the general user to make
various settings that are used in the running of the printer.
Administrator menu: activated by pressing the Enter button for more than 2 seconds
while turning on the printer power supply (including Restart). Available to
administrator level users. Restricts the changes that general users can make via the
user menus.
System maintenance menu: activated by pressing the Up-arrow and Down-arrow
buttons together for more than 2 seconds while turning on the printer power supply
(including Restart). Available to specialist staff to allow printer configurations and
special functions to be set.
C ONFIGURATION INFORMATION
Configuration information displays printer configuration information such as internal
firmware versions.
Menu options at each level can be scrolled through by moving the highlight with the Up-
arrow/Down-arrow buttons and a highlighted option at that level can be selected by
pressing the Enter button. When the lowest level menu has been selected, you can change
the setting for that menu by selecting the required highlighted value from a list or by
entering a numeric value. In other cases, you can display or print configuration information.
H ELP MODE
When an error has occurred, press the Help button. Information displays that will help you
correct the error.