Operation Manual

- 131 -
6. Troubleshooting
The output port of the printer driver is
incorrect.
Select the output port for connecting
the LAN cable or USB cable.
-
The machine is processing data from
another interface.
Wait until printing is complete. -
[Received invalid data] is displayed
on the touch panel and the machine
does not print.
Press [Device Settings], select
[Admin Setup] > [Print Setup] > [Print
menu] > [Printer Adjust] > [Timeout
Injob] on the touch panel, and then
select a longer time. The factory
default setting is 40 seconds.
-
Cause Solution Reference