Operation Manual

Maintenance > 69

11. Pressing gently down on the cartridge to ensure that it is firmly seated, slide the

coloured collar fully towards the left hand side of the printer. This will lock the

cartridge into place and release toner into the image drum unit.

12. Repeat steps 9 and 11 for the remaining three cartridges.

13. Holding the complete assembly by its handles, lower it into place in the machine,

locating the pegs at the sides into their slots in the sides of the printer cavity.

14. Finally, close the top cover and press down firmly at both sides so that the cover

latches closed.