Operation Manual

Replacing consumable items> 54
4. Put the old unit down gently onto a piece of paper to
prevent toner from marking your furniture.
5. Take the new image drum unit, complete with toner
cartridge (assembled according to the installation guide)
and place it on the piece of paper where the old ID unit
was placed. Keep it the same way round as the old unit.
Pack the old ID unit inside the packaging material for
disposal..
6. Holding the complete assembly by its top centre, lower it
into place in the printer, locating the pegs at each end into
their slots in the sides of the printer cavity.
7. Finally, close the top cover and press down firmly at both
sides so that the cover latches closed.
CAUTION!
The green image drum surface at the base of the
cartridge is very delicate and light sensitive. Do not
touch it and do not expose it to normal room light for
more than 5 minutes. If the drum unit needs to be out of
the printer for longer than this, please wrap the
cartridge inside a black plastic bag to keep it away from
light. Never expose the drum to direct sunlight or very
bright room lighting.