Printer User Manual
Table Of Contents
- Copyright Information
- Contents
- Notes, Cautions, etc.
- Introduction
- Parts of the Printer
- Paper (Print Media)
- Paper Trays
- Paper Exit Paths
- Loading Paper
- Consumables and Replacement Supplies
- Printer Settings (Menu Settings)
- Options
- Specifications
- Troubleshooting
- General Information
- Display Panel Messages
- Paper Jams
- Print Quality Problems
- USB Problems
- Application error
- General Protection Fault
- Paper Size Change Request
- Printer does not go online
- Printer makes a strange noise
- Printer takes a long time to start printing
- Printing cancels
- Printing does not start
- Printing is slow
- Cleaning Page
- Printer Drivers
- Printer Features
- Overview
- Banners
- Black Finish
- Black Overprint
- Black Printing
- Booklets (Binding Print)
- Collating
- Color Matching
- Overview
- Basics
- What this guide describes
- Background Information
- Factors that Affect Color Printing
- Choosing a Color Matching Method
- Color Settings
- Hue, Brightness, and Saturation
- How To
- Color Match Precision
- List of Color Matching Methods
- Descriptions of Color Matching Methods
- Automatic
- Office Color
- No Color Matching
- Grayscale
- Color Synch
- Custom Page Sizes
- Duplex Printing
- (Printing on Both Sides of the Paper)
- General Information
- Paper Types
- Paper Weights
- Paper Sizes
- Long Edge vs. Short Edge
- Duplexing Restrictions
- Windows PostScript: All Print Jobs (Default)
- Windows PostScript: Single Job
- Windows PCL: All Print Jobs (Default)
- Windows PCL: Single Print Job
- Macintosh OS 9.x
- Macintosh OS 10.1 & 10.2
- Macintosh OS 10.3
- Grayscale
- N-Up Printing
- Photographs
- Posters
- Print Resolution
- Save as File
- Toner Saving
- Watermarks
- Utilities
- Overview
- Accessing
- Descriptions of Utilities
- Installing the Utilities
- Color Correction Utility
- Color Swatch Utility
- Direct Network Printing Utility (LPR)
- Display Language Utility
- Network Printer Status Utility
- Network Setup Utility
- PS Gamma Adjuster Utility
C6000n User’s Guide
101
Print Menu
Notes:
Factory default settings are shown in bold.
Item Settings Explanation
COPIES 1 to 999 Enter the number of copies of a
document to be printed.
DUPLEX ON
OFF
Enables or disables duplex printing.
Only appears when the option is
installed.
PAPER FEED TRAY1
TRAY2
MP TRAY
Selects the default tray for paper feed.
TRAY2 only appears when the option is
installed.
AUTO TRAY
SWITCH
ON
OFF
If two trays contain identical print
media, the printer can switch to an
alternate tray when the current tray
runs out in the middle of a print job.
TRAY
SEQUENCE
DOWN
UP
PAPER FEED TRAY
Sets the sequence in which the printer
will seek an alternate tray with the
same media size should the currently
selected tray run out of media while
printing a job.
MP TRAY
USAGE
DO NOT USE
WHEN MISMATCHXXX
If a document to be printed demands a
paper size not installed in the selected
tray, the printer can automatically feed
from the Multi-Purpose Tray instead. If
this function is not enabled, the printer
will stop and request that the correct
size be loaded.
MEDIA
CHECK
ENABLE
DISABLE
Set to DISABLE if you do not wish the
printer to check to see if the size paper
loaded in the selected tray matches that
required for the document being
printed.
MONO-
PRINT
SPEED
AUTO SPEED
COLOR SPEED
Sets the print engine speed.
If you are printing only color
documents, switch to COLOR SPEED.
AUTO SPEED sets the speed of printing
based on whether the first page is color
or monochrome.