Fax Machine Users Guide 4500

User’s Guide 71
English
10. Press the SELECT FUNCTION key to finish or continue
to change department IDs.
Closing Restricted ID
1. Using the numeric keypad, enter your four digit password.
2. Press the SELECT FUNCTION key.
3. Press the USER PROG One Touch key. The display shows:
1:FUNC. PROGRAMMING
YES (
ßß
ßß
ß) NO (
àà
àà
à/1-7)
4. Using the numeric keypad, press number 7. The display
shows:
7:RESTRICT ID PRG.
YES (
ßß
ßß
ß) NO (
àà
àà
à/1-7)
5. Press the ô YES key and the display shows:
DEPARTMENT NO. [ ]
ENTER 01-24
6. Using the numeric keypad, enter the two digit code of the
department ID you want to close and the display changes
to:
ENTER ID [XXXX]
ENTER 4DIGITS
7. Using the numeric keypad, enter the required four digit
password and the display changes to:
ID CLOSE
YES (
ßß
ßß
ß) NO (
àà
àà
à)
8. Press the ô YES key and the display changes to:
DEPARTMENT NO. [ ]
ENTER 01-24
9. Press the SELECT FUNCTION key to finish or continue
to close department IDs.
Dial Parameter Settings
These functions allow you to control the way your fax machine
dials telephone numbers. Refer to Dial Parameter Settings List
to determine which settings you may need to change, then refer
to Changing Your Dial Parameter Settings to make the change.
Note: Some settings are not available in some countries.
If you have trouble accessing a dial parameter setting listed
here, contact your dealer for assistance.
Dial Parameter Settings List
REDIAL TRIES: This function controls how many times your
fax machine automatically redials a number which is busy or
which does not answer. Available settings are from 0 to 10 tries
REDIAL INTERVAL: The function controls how long your
fax machine waits between each automatic redial attempt.
Available settings are from 1 to 6 minutes.
DIAL TONE DETECT: This function allows your fax machine
to wait for and detect a dial tone before proceeding with dialling.
Available settings are on and off.