Datasheet
72
TECHNOLOGY, SPEED AND
Print Method: 9-pin (.34 mm diameter) Serial Impact Dot Matrix
PRINT CHARACTERISTICS
Print Speed (cps)
1
: NLQ Utility High Speed Draft
75 300 387
Horizontal Resolution: 180 dpi Normal; 240 dpi Condensed
Sensors/Status: Paper out, Paper low, Form sensor, Cover open
Printer Controls: Via software or Front Panel
EMULATIONS AND INTERFACE
Resident Emulation: OKI
®
POS (Epson
®
ESC
®
plus additions)
Standard Interfaces: IEEE 1284 bi-directional parallel; RS-2232C serial
Cash Drawer Drivers: 2 standard
FONTS/CHARACTERS
Code Pages: USA, Multilingual, Portuguese, Canadian French, Norwegian, BRASCII,
ABICOMP, ISO 8859/15, Multilingual 858
Bar Codes: EAN 8, EAN 13, UPC A, UPC E, Code 39,
Interleaved 2 of 5 (ITF), Code 128, CODABAR (NW-7)
PAPER INPUT
OKIPOS 425S (2-ply Roll Paper): 69.5 mm (2.73") or 76.2 mm (3.0"); 101.6 mm (4.0") roll diam. max.
OKIPOS 425D (1-ply Roll Paper): 69.5 mm (2.73") or 76.2 mm (3.0"); 83.0 mm (3.26") roll diam. max.
Slip/Top Insertion: Width: 70.0 mm (2.76") or more; Length: 40.0 mm (1.57") or more
Slip/Cut Sheet: Width: 105.0 mm to 215.9 mm (4.13"to 8.5");
Length: 70.0 mm to 297.0 mm (2.76"to 11.7")
Continuous Forms
1
: Width: 76.2 mm to 215.9 mm (3.0"to 8.5");
Length: 76.2 mm to 355.6 mm (3.0"to 14.0")
PRINTING AREA
Utility Mode (16.4 cpi): Receipt/Journal – 45 or 41 Col.; Slip – 103 Col.
HSD (20 cpi): Receipt/Journal – 56 or 50 Col.; Slip – 126 Col.
Maximum Printing Width: 160.0 mm (6.3")
Number of Copies: Cut sheet – 5 max.; Pin-feed – 4 max.
Paper Feeding: Rear – Receipt/Journal; Top – Counterfoil/Validation;
Front – Cut sheet/Pin-feed (with optional Front Push Tractor)
PRINT/FEED RATES
High-Speed Draft: 20 cpi; 387 cps; 19.3 ips
(SIZE, SPEED, FEED)
Utility 16.4 cpi; 317 cps; 19.3 ips
Line Feed Rate (ips): 11.4 cm (4.5")
RELIABIL?ITY
MTBF: 10,000 hours (25% duty cycle, 35% page density)
Printhead Life: 200 million characters in Utility mode
Duty Cycle: 50,000 transactions/year @ 20 lines
ENVIRONMENTAL
Size (WxDxH): 26.5 cm x 33.7 cm x 21.8 cm (10.4" x 13.2" x 8.6")
Net Weight: 7.0 kg (15.4 lb.)
Power Consumption: 40W (max.) operating; 15W (max.) idle
Electrical: 120VAC ± 15%; 230VAC ± 15%
Operating Temperature: 41˚F to 104˚F (5˚C to 40˚C); 20% to 80% relative humidity
CONSUMABLES AND OPTIONS
Ribbon Type: Black Nylon Re-inking Cartridge (3 million characters nominal life)
Optional Push Tractor Kit: Front mount
1
Print speeds apply to all pitches (10, 12, 17.1, and 20 cpi).
2
Requires Optional Push or Pull Tractor
Specifications
OKIPOS
®
425 Series