Datasheet

42
Power Save sets how long the printer
waits before going into standby mode
(default = 60 min). This saves energy,
but the printer requires time to warm
up when it receives a print job or if
you want to enter the menu and
change settings.
Set the Time Interval
1. Press ENTER .
2. Use the
∇ key to scroll down to
Menus. Press ENTER .
3.
∇/ ∆ keys → System Adjust . Press
ENTER .
4. Highlight
Power Save Time . Press
ENTER .
5.
∇/ ∆ keys → select the time
interval. Press
ENTER .
6. Press
ON LINE to exit the Menu
mode.
Disable Printer Power Save
1. Press ENTER .
2.
∇/ ∆ keys → Admin Setup . Press
ENTER .
3.
∇/ ∆ keys → Yes . Press ENTER .
Offline appears on the display.
4. Wait for Setup to run.
The
Setup menu appears.
5.
∇/ ∆ keys → Printer Setup . Press
ENTER .
6. Keep pressing
ENTER repeatedly
until
Power Save appears.
7.
∇/ ∆ keys → Disable . Press ENTER .
8. Press
ON LINE .
9. Press
ENTER to select Exit Setup.
10.Wait for the printer to initialize.
Printer Power Save Mode