Datasheet

Close the paper separator and swing the wire feed guide forward so that it rests on the pull-up
roller assembly (7).
Note:
The wire feed guide keeps the continuous-form paper from curling back into the printer.
Push the FF/LOAD button (8). The paper automatically feeds into the printer and the
ALARM light goes out. The printhead travels back and forth, gently firing the pins to
sense the thickness of the paper and to set the printhead gap. Press the SEL
button to select the printer, then set the Top of Form using the procedure
described for single-sheet paper.
ML590/591 ( 96-02-07 )