User manual

Specifications

Ambient Operating Temperature 10 - 40°C (50 - 104°F)

Maximum Enclosure Temperature 55°C (131°F)

Input Line Voltage 100- 240 VAC, grounded circuit

Input Line Frequency 50/60 Hz

Power Consumption 110 Watts max. (MFR-PS1300)

Output Power 60 Watts max. at 22°C (71°F) ambient temperature

Output Frequency 450 kHz

Power Cord 3-Wire 183cm (72”) (18/3) SJT

Dimensions w x d x h 170mm (7”) x 200mm (8”) x 152.5mm (6”)

Certification / Marking cTUVus, CE

Tip-to-Ground Potential <2mV

Tip-to-Ground Resistance <2 ohms

Idle Temperature Stability ± 1.1°C (34°F) in still air

Desolder Hand-piece Cable Length L=152cm (60”), burn proof, ESD safe

Other Hand-piece Cable Length L=122cm (48”), burn proof, ESD safe

Hand-piece Connector 8-pin circular DIN

Workstand Dimensions w x d x h 100 mm (4”) x 200 mm (8”) x 100 mm (4”)

Warranty

Please visit OK International’s web page (www.metcal.com) where you will find available

information on systems, accessories, technical notes, and more.

OK International warrants the MFR-PS1300 against any defects in materials or workmanship

for one (1) year from the date of purchase by the original owner. This Warranty excludes

normal maintenance and shall not apply to any opened, misused, abused, altered or damaged

items. If the product should become defective within the warranty period, OK International will

repair or replace it free of charge at its sole option. The repaired or replacement item will be

shipped, freight prepaid, to the original purchaser. The warranty period will start from the date of

purchase. If the date of purchase cannot be substantiated the date of manufacture will be used

as the start of the warranty period.

The MFR-H5-DS hand-piece uses a coil assembly which is a consumable item. OK

International warrants the coil assembly against material and workmanship defects for a period

of 30 days. For contact details for Warranty and Support look for your local office details at: