User manual
www.okinternational.com
8
TROUBLESHOOTING
Symptom Possible Cause Solution
LED does not No power Check electrical outlet for output
illuminate Check On/Off switch
Check power cords
Check for main filter
Check for safety interlock switch
LED orange Blocked filter or air flow Change filter (See Replacement of
Filters. Note: change pre-filter first. If
the LED is still orange, replace the
main
filter.)
Little air flow Air leak Housing not installed correctly
Arm adaptor not installed correctly
No air flow Blower does not work No electrical power
Interlock switch open No filter installed
Housing not closed correctly
Please call OK INTERNATIONAL if: your system is still not working properly,
or if the LED is green with no air flow.
SPECIFICATIONS
Static Pressure: 5 in H20 (1250 Pa)
Flow Rates: 50 CFM (85 m3/hr) w/HEPA filter
Noise Level: < 55 dbA
Weight: 14.3 lbs. (6.5 kg)
Size H x W x D: 11.5” x 12” x 9” (29cm x 30cm x 23cm)
Voltage: 90 – 264 VAC
Frequency: 50 – 60 Hz
Power: 85 Watt
WARRANTY
OK International warrants the BVX-100 system, except consumables (e. g.
arms, nozzles and filters), against any defects in materials or workmanship for
one year from the date of purchase by original owner.
If the product should become defective within the warranty period, OK
International Inc., will repair or replace it free of charge at its sole option. The
replacement item(s) will be shipped, freight prepaid, to the original purchaser.
The warranty period will start from the date of purchase. If the date of