Specifications

2.Press UP ( ) and DOWN ( ) buttons up to 1 second to escape from lock mode. Lock icon will be removed
(a) Front view
User Manual
Illustration:
1. Antenna
2. LCD window
3. UP button
4. DOWN button
5. Power On/Off button
6. Lanyard tie-up
7. Battery room
8. Power/TX LED indicator; Power/RX LED indicator
9. Microphone input jack (TX); Earphone input jack (RX)
10. Volume adjustment wheel
11. Charging contacts
Operation and Instructions:
UHF PLL Tour Guide System
(b) Side view
1
2
3
4
5
6
7
11
8
9
10
8
9
10
(c) Rear view
(d) Top view
(e) Bottom view
(RECEIVER)(TRANSMITTER)
2.Press and hold power button ( ) up to 2 seconds. The LCD window will display then power off completely.
Power On and Power Off:
1.Press and hold power button ( ) up to 2 seconds. The LCD window will display at a short time and retrieve
the channel number used last time. Power on successfully.
Automatic Keylock and Unlock:
Lock icon ( ) will be displayed in LCD window. In Lock mode, the channel number can’t be changed.
1.Channel number will be locked automatically when no change made to UP and DOWN button in 5 seconds
1.When battery icon is displayed as full autonomy (4-level), the battery contains sufficient energy.
2.When battery icon is displayed as low battery (1-level), which indicates only 10% battery energy life.
from LCD window.
Battery Autonomy:
Please change with new battery or give a charge.
Volume Adjustment:
Adjust volume to a required level with the volume wheel.
Unit in Charging:
When this unit (transmitter or receiver) is employed by a charger, it will be shut off automatically, no matter
it is On or Off before putting onto the charger.