Installation Instructions

OmniTourGuidingSystemOTG‐200
10
Generaloperation
Poweron
Pressandholdthepowerbutton(
9
21
)for1secondtotransmitter/receiveron.
Changecommunicationmodeontransmitter
Pressandholdboth(
8
)andpower(
9
)buttonssimultaneouslytoturntransmitteron.
DefaultmodeTEACHINGshowsup.Presstheorbutton(
8
)tochangeyourpreferred
mode.
Pressthepowerbutton(
9
)toconfirm(underline)theselectionandleavethesetting.
Transmitterwillthenbeturnedonautomatically.
Detectcommunicationmodeonreceiver
Receiverwillautomaticallydetectthesignalfromtransmitterwhenitisturnedon.
T,GorDwillthenshowuponreceiversscreenformodedifferentiationandindicatingcorrect
connectionwiththetransmitter.Notebothtransmitterandreceiverneedtobesetatsame
channel,thencommunicationmodewillshowupautomatically.
Tochangeyourmode,simplyturnreceiveroffandthenre‐turnitontoacquirenewsignalfrom
anothertransmitter.
Assignyourgroupchannel
Pressbothandbuttons(
8
20
)simultaneouslytounlockthechannelwhentransmitteror
receiverison.
Symbol disappearsandpressorbutton(
8
20
)toselectanotherpreferredchannel.
Toconfirmnewlyselectedchannel,pressthepowerbutton(
9
21
)orleavethetransmitteror
receiveridledfor1secondtoleavethesettingautomatically.
Bothtransmitterandreceivercanworktogetheronlywhentheirchannelandcommunication
modearesame.
*Redlightwillshowupiflowbatteryhappens.
Whenthecommunicationbetweentransmitterandreceiveriscorrect,theirsignalindicators
(
3
15
)willshowbelow.
Transmitter:Slowflashingblue
*
light(Continuousbluelightshowsupifthetransmitteracquires
thesignalfromonereceiver.)
Receiver:Steadyblue
*
light(Slowflashingbluelightshowsupifitdoesnotacquirethe
signalfromthetransmitter.)