Installation Instructions

Product introduction
The OTS600N has a powerful programming ability to provide various timer and
temperature requirement. It is ideal for most heating appliances, such as infra-red
heaters, tube heaters, fan heaters, floor heaters and portable radiators, as well as
many electric cooling devices. Please read this manual carefully before starting or
using the device. Always store the manual in a safe place for future reference.
Features:
-Temperature control range: 0.0℃~70℃ or 32.0℉~158.0℉
-Time, week, temperature range can be programmed in combination.
-3 modes: Manual Mode (always ON/OFF), Thermostat-Mode, Thermo-Timer-Mode
(up to 4 settings).
-2.4GHz wireless auto connection technology.
-Easy to view LCD screen with LED backlight.
-12 or 24 hours setting for time.
-C-Celsius and F Fahrenheit.
-DST - Daylight saving time selection.
-Low battery alert icon, appears when the battery should be replaced.
-Current temperature correction and system reset function.
-Top safety protection, built-in with its own relay control and fuse protection,
and the socket is made of flame retardant PC material.
STEP 1 STEP 2
STEP 3
Press and hold the - and + button for
3 secs to activate the remote control
pairing mode. The icon flashes
indicating the remote is in pairing mode.
Press and hold the receiver button
for 3 secs, the red LED blinks indicating
the socket is in pairing mode.
When the red LED stop flashing and the
icon stays on the display indicating
that the pairing is completed.
CONTENTS
Product introduction
Display information
M OK - + button functions
Pair to socket
Set system time
Thermostat-Mode
Thermo-Timer-Mode
Current temperature correction
System reset
Battery replacement
Warning
1
2
3-5
6
7-8
9
10-11
12
13
14
15
1
6
7
8 9
10
11 12 13
Display information
DST
MODE
2 3
5
Thermo-Timer-Mode
Daylight Saving Time
Program start time
Program end time
Centigrade degree
Target Temperature
Fahrenheit degree
Battery low warning
Cool mode
Heat mode
Day
AM/PM
Connection status
Current
Temperature
Socket status
M
functions
OK
functions
-
+
functions
Press
Press and hold
Press
1) Press the M button to switch between Home Page and Thermo-Timer-Mode.
2) Press and hold the M button to start setting System Time or Thermo-Timer-Mode.
DST
Home page Thermo-Timer-Mode
Press
1) In Thermo-Timer-Mode, press OK button to turn on/off the MODE.
DST
MODE
DST
MODE
DST
MODE
Close the MODE 3
Open the MODE 3
2) Press OK button on Home Page to switch among Always ON, Always OFF, Thermostat-Mode.
DST
DST
DST
Always ON
Always OFF
Thermostat-Mode
3) Under programming or setting
status, press OK button to confirm
and proceed to next step.
DST
Press and hold OK button to switch
heating and cooling mode
Press OK button on Home Page
to enter Thermostat-Mode
4
DST
MODE
DST
MODE
DST
MODE
DST
MODE
1) Choose the program in Thermo-Timer-Mode
-
Press
Press and hold
2) Press -/+ to increase or decrease the digit
in programming and setting mode, press and
hold -/+ for fast increase/decrease.
MODE1
MODE 2
MODE 3 MODE 4
Paire to socket
Set system time
Battery replacement Warning
Set system time Thermostat-Mode
Thermo-Timer-Mode
Thermo-Timer-Mode
System reset
Current temperature correction
MODE
MODE MODE
MODE
DST
Press and hold M on Home
Page to start setting
Press -/+ to choose 12H/24H
Press -/+ to choose
MON to SUN
Press -/+ to choose
℃/℉
Press -/+ to set Differential value in
Thermostat-Mode, 01℃-04℃ or
01℉-04℉
Press -/+ to set hour
DST
MODEMODE
MODE
DST
MODE MODE
M
ODE
Press -/+ to set minute
Press -/+ to set DST ON/OFF
DONE!
Differential value
For example, when you set the differential value to 2℃, and set target
temp. to 25℃, heating mode. The device will turn on at 25-2=23℃, and
ture off at 25+2=27℃. Equivalent to setting a temperature range of
23~27 degrees.
The diffential value in Thermostat-Mode is set in the last step of the
system time setup.
The diffential value in Thermo-Timer-Mode is set in each program of
Thermo-Timer-Mode.
Press and hold
Press -/+ button to set
the TARGET temperature
DONE!
DONE!
Press M button switch to
Thermo-Timer-Mode
Press -/+ button to select
MODE 1,2,3,4
Press OK button to active
the MODE you selected
Press and hold the M
button to start setting
Press -/+ button to choose
7 days, Working day,
Weekend, One day of the week
Press -/+ button to
program the End Time,
set hour/minute
Press -/+ button to
program the Start Time,
set hour/minute
Press -/+ button to
set the differential
value
Press -/+ button to
choose cooling or heating
mode
Press -/+ button to set
the TARGET temperature
Differential value
For example, when you set the
differential value to 2℃, and set
target temp. to 25℃, heating mode.
The device will turn on at 25-2=23℃,
and ture off at 25+2=27℃. Equivalent
to setting a temperature range of
23~27 degrees.
Each remote has been calibrated before leaving the factory, so we don't
recommend this feature unless you have confirmed that the current
temperature of the device is not accurate.
Long press M and + button
for 6s to enter temperature
correction mode.
Press -/+ button to correct
the Current temperature
Long Press M and +
button for 6s to save
and exit
Press M and OK button for 3s
to reset the system
Initial system interface
NOTE:
After the system reset, your previous settings will not be retained,
and all data will be restored to the default.
2 pcs AA
alkaline
Step1: take off battery compartment
cover
Step2: Insert/replace with 2*fresh
AAA alkaline batteries, then snap the
cover back
Do not use the device in potentially explosive rooms.
Do not use the device in aggressive atmosphere.
This appliance is not a toy! Keep away from children and animals.
Protect the device from permanent direct sunlight.
Do not remove any safety signs, stickers or labels from the device.
Keep all safety signs, stickers and labels in legible condition.
Do not open the device with a tool.
14 15
Warning:
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE：
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE：
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement
it can be used in portable exposure condition without restriction.