Datasheet

HAND WRAPPING AND UNWRAPPING TOOL
14
Wire Size Max. Insulation Terminal Hole Terminal Hole Outside
Part No. Reg. Mod. Type Diameter Diameter Depth Diameter
AWG mm Inches mm Inches mm Inches mm Inches mm
HW-224 ● A 22-24 0.65-0.50 – – .075 1.90 .807 20.50 .218 5.53
HW-224LH ● A 22-24 0.65-0.50 – – .086 2.18 1.000 25.40 .218 5.53
HW-24DHM ● A 24 0.50 .050 1.27 .069 1.75 1.125 28.50 .218 5.53
HW-2426 ● A 24-26 0.50-0.40 – – .075 1.90 .750 19.05 .218 5.53
HW-26 ● A 26 0.40 – – .075 1.90 1.000 25.40 .218 5.53
*HW-26SM ● A 26 0.40 .031 0.79 .040 1.02 .750 19.05 .125 3.17
*HW-30 ● B 30 0.25 .027 0.69 .036 0.91 .750 19.05 .125 3.17
*These tools are recommended for .025" (0.63mm) square terminals on .100" (2.54mm) centres
Note: HW-22 and HW-24 have been replaced by HW-224.
These tools are used to remove wire connections
using 18 thru 32 gauge wire.
Type of Terminal Terminal Outside
Part No. Type Wire Size Unwrap Hole Diameter Hole Depth Diameter
AWG mm Inches mm Inches mm Inches mm
UW1 A 20-26 0.80-0.40 Left Hand .070 1.77 1.000 25.40 .156 3.96
UW2 E 20-26 0.80-0.40 Left and Right Hand .070 1.77 1.000 25.40 .156 3.96
UW4 D 20-26 0.80-0.40 Left Hand .070 1.77 2.360 60.00 .187 4.74
UW5 D 20-26 0.80-0.40 Left and Right Hand .070 1.77 2.360 60.00 .187 4.74
UWD93-93 E 24-32 0.50-0.20 Left and Right Hand .038 0.96 1.000 25.40 .093 2.36
UW2832C D 28-32 0.32-0.20 Left and Right Hand .038 0.96 .750 19.05 .156 3.96
Type “A”
Type “E”
Max. Terminal Terminal
Part Wire Size Insulation Hole Hole Outside Wire Size
Number Reg Mod Diameter Diameter Depth Diameter
AWG mm In. mm In. mm In. mm In. mm AWG mm
HW-UW-224 ● 22-24
0.50
– – .075 1.90 .807 20.50 .218 5.53 20-26
0.80
0.65 0.40
HW-UW-224-1
● 22-24
0.50
– – .075 1.90 1.000 25.40 .218 5.53 20-26
0.80
0.65 0.40
HW-UW-224LH
● 22-24
0.50
– – .086 2.18 1.000 25.40 .218 5.53 20-26
0.80
0.65 0.40
HW-UW-24DHM
● 24 0.50 .050 1.27 .069 1.75 1.125 28.50 .218 5.53 20-26
0.80
0.40
*HW-UW-24SM
● 24 0.50 .044 1.11 .044 1.11 .750 19.05 .156 3.96 20-26
0.80
0.40
HW-UW-2426
● 24-26
0.40
– – .075 1.90 .750 19.05 .218 5.53 20-26
0.80
0.50 0.40
HW-UW-26
● 26 0.40 – – .075 1.90 1.000 25.40 .218 5.53 20-26
0.80
0.40
*HW-UW-26SM
● 26 0.40 .031 0.79 .040 1.02 .750 19.05 .125 3.17 24-32
0.50
0.20
*These tools are recommended for .025" (0.63mm) square terminals on .100" (2.54mm) centres.
Note: HW-UW-22 and HW-UW-24 have been replaced by HW-UW-224.
Terminal Terminal
Hole Hole Outside
Diameter Depth Diameter
In. mm In. mm In. mm
.
.070 1.77 1.000 25.40 .156 3.96
.070 1.77 1.000 25.40 .156 3.96
.086 2.18 .750 19.05 .156 3.96
.070 1.77 1.000 25.40 .156 3.96
.038 0.96 1.000 25.40 .093 2.36
.070 1.77 1.000 25.40 .156 3.96
.070 1.77 1.000 25.40 .156 3.96
.038 0.96 1.000 25.40 .093 2.36
.
To switch from wire wrapping to unwrapping takes
only seconds - just a quick change of the cap from
one end to the other.
HAND UNWRAPPING TOOLS
HAND WRAPPING AND UNWRAPPING TOOLS
WRAPPING SIDE UNWRAPPING SIDE
HAND WRAPPING AND UNWRAPPING
TOOLS
HAND WRAPPING TOOLS
These Hand Wrapping Tools are carefully designed to
produce perfect wire wrapped connections.
Precision, long-lasting tools for use where occasional
wraps are required or where power wire-wrapping
tools are not practical. Compact and convenient.
Type “D”