User's Manual

1_OTS LOCKS OJMAR 17

1.4 OPENING AND CLOSURE

The lock opening and closure process is as follows:

1.4.1 Closure

1. Bring the key towards the knob of the open lock and press the knob it inwards.

2. Press the knob in fully. The lock is then automatically closed, with the fixed part

protruding by 6mm.

1.4.2 Opening

1. Bring the key towards the knob of the lock and press it inwards.

2. If the key matches the lock (and has no restriction applied: Out-of-hours access

assigned, etc.) it will automatically unlock. The knob will move outwards fully.

1.5 LOCK TYPES

OTS locks can be configured in two different ways:

 Free.

 Dedicated.

These locks are programmed using the keys previously programmed with the Ojmar

Management Software (See Section 4) or using the Ojmar NFC Portable

Programmer (See Section 2.2).