Owner Manual

2 3
1
3
2
4
INSTALLATION METHOD
1. Install the corner supporting to the four corners of the bottom frame and lock it with screws, then stick
the middle supporting with backing.
2. Screw the threaded metal tube onto the bottom base and lock as shown below.
3. Install the support onto the four metal tubes.
4. Install front block glass, front glass, back glass and side glass.
5. Tighten the top frame to the metal tubes with 4 screws.
6. Install the top mesh panel with 4 rubber caps on top to cover the screws.
Lock
Unlock
Metal Lock