. Introduction . Battery Installation . Summary of Operations A. Description of Devices B. P re-programed codes C. Learning D. Macro Operation E. Punch Through F. Editing the buttons on LCD screen G. Loading program H. All Other Operations LCD Screen and Button Layout 7 5. Getting Ready with System Setting 8 6. Programming the Remote Control 9 A. Reprogramming Method g 1) Using a three-digit code number 2) Auto scan with brand names B. Learning method 12 C.
The M-1000 is a very powerful and flexible reprogrammed and learning remote control with LCD touch screens. It is designed to operate up to twelve home entertainment components. You can program it for your components either from the reprogrammed code library in the remote control or you can teach up to 780 bunions into M-1000 from your original remote controls. The M-1000 has many advanced operating features that can add convenience and enjoyment of your home entertainment system.
M-1000 uses four AA batteries. Please be sure to match the batteries with the and markings inside the battery compartment during installation. The remote control goes through self-testing for three seconds after the batteries are installed and automatically moves to setting mode for your programming.
A. Description of Devices: The M-1000 is designed to operate up to twelve components. They are Audio, CATV, Satellite, TV, DVD, VCR, VCR, Laser Disc, Tuner, CD, Tape and AUX. However. the device button name can be changed to meet your exact needs. You can also create a favorite device page und transfer the frequently used devices to the favorite | device page in order to change the device button sizes and shapes. Once you create the favorite device page. it will appear as a default device page.
D. Macro Operation: The remote control is capable of sending out a series of commands with one button press. There are three types of macro buttons you can use for such macro operations and they are as follows: 1. M1, M2 and M3 bunions on MAIN page. Each of these three buttons are designed to send out up to 28 series of commands you programmed into the buttons. It is typically used to turn on and turn off all of your A/V components with one bunion press. 2. Device buttons on Main page.
0 SR operations F. Editing the buttes on LCD screen. You can change the size and shape of the buttons on the LCD screen. You can also create. delete, copy and move the buttons from one location to another on the LCD. In addition. you can erase and write your own text with different font sizes on the buttons. This could be done directly on the remote control without a personal computer or with the aid of personal computer. Please refer to page 20 in the manual for details. G.
HG Em Golly a Hus ERT ASTER EB Displays the name of the device selected. 8 Displays the data and clock E] Displays page number. 3 Displays the device names 8 LIGHT button [8 MACRO bunions. MAIN DEVICE menu bunion, 6) LCD Page change button. BE) POWER | @ MUTE VOLUME CHANNEL {8 Previous channel button TRANSPORT functions(PLAY. STOP. REWIND and FF) for VCR, CD and DVD ete. {B JOYSTICK button(UP, DOWN. LEFT.RIGHT and ENTER to move the cursor and enter the selection by pushing down the joystick.
ps setting 5.6 em Setting Al the programming is done by first entering the SYSTEM SETTING mode in the remote control. Press both the MAIN and PAGE buttons simultaneously for five seconds to enter the SYSTEM SETTING mode. SYSTEM SETTING . TOUCH PAD ALIGNMENT . SYSTEMS & OPTIONS . REPROGRAM . LEARNING . EDIT BUTTONS . SET DATE & CLOCK . PROGRAM LOADING LTO EXIT CNN bh wn SELECT : JOY STICK av { ENTER : JOY STICKS Rem sen rs Move the cursor on the screen with the joystick to your selection in the list.
You can program the M-1000 to make it compatible with all of your components by following either the reprogramming method or teaching it with your original remote controls. A. Reprogramming Method: 1) Using a three-digit code number, 1. Turn on the component you plan to operate manually. 2. Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds 3. Using the joystick, move the cursor down in the LCD screen to 3. REPROGRAM. 4.
Coe CY 8. Confirm that you entered the right code number that matches your component by pressing other buttons such as POWER, VOLUME. MUTE and CHANNEL. If any of the buttons do not operate as they should. please repeat from Step 5. 9. Continue to program other components by repeating from the above step 5. 10. Once you completed programming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simultaneously. 11. You will be iu the setting mode once again.
NOTE: Confirm that it is the right code number for your component by pressing other buttons such as POWER, VOLUME. MUTE and CHANNEL. cte. If any of the buttons do not operate as they should, please repeat from Step 5. 10. Continue to program other components by repeating from Step 5. 11. Once you have completed programming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simultaneously. 12. You will be in the setting mode. Move the cursor to 8.
4. Place your original remote control to the M-1000 head to head about 2-3 inches apart as shown below. M-1000 Original remote 5, Press either the device button or functional button, whichever you wish to teach in the M-1000. It is now ready to learn on the button you selected. Press the button on your original remote control that you wish to teach into the M-1000. The M-1000 will “beep” indicating that it received the signal and the LCD will show "RETRY".
C. To Erase the Learned Buttons 1) To erase a single button: 1. Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds. 2. Move the cursor to 4. Learning with the joystick and then push the Joystick down to enter the learning mode. 3. Move the cursor to COMMON BUTTON and select the device that contains the functional button you wish to erase. If you wish to erase the function in the device button. move the cursor to DEVICE BUTTON.
3. Press the MUTE button to move the cursor to the DEVICE BUTTON and keep the device button you wish to erase all the yearned commands down for five seconds until the LCD shows ERASED. This will erase the function taught in the device button. If you continue to press the device button for another five seconds, it will erase all the functions in the device. 4. Once you complete the erasing and wish to exit from this mode, press the MAIN button to go back to the main page of the learning mode.
Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds. Move the cursor on the LCD screen to 2. SYSTEM & OPTIONS with the joystick. Enter this mode by pushing the joystick down and the following can be programmed: A. Setting Up the System. The LCD screen will list the following choices. re | grammar— i Me xix I ET 1[35n,, HIGH ur LE me sec | : i (macro Prof] [SAVE PUNCH PRIG) sp Range Default Buzzer Status: High. Low.
B-1. Macro Programming: There are three type of macro functions you can program. They are as follows: 1. M1, M2 and M3 in the Main menu: . Designed to send oul up to twenty cit commands {rom cache of the three buttons. 2. Twelve device buttons in the Main menu: Send out up to fourteen commands from each device button. 3. Favorite Channel Buttons: “You can create and design up to 60 buttons as your Favorite Button in video modes.
2) For Device Buttons: 1. Press one of the twelve device buttons you wish to store macro functions with the cursor on DEVICE BUTTON. 2. Move the cursor to COMMON BUTTON and select again either the same or another device button whose functional buttons you wish to store in the device macro button you selected first. You can store up to 14 commands into the device macro buttons. 3. Store the commands you selected to the macro button by pressing CH (UP) button. To cancel the macro commands, press CH (DOWN).
C. To Program Punch Through Functions. You can use audio receiver volume control in a different mode ( eg. Audio receiver Volume Up and Volume Down and Mute in Satellite mode ) using a volume punch through feature. You can also have four VCR ( or DVD ) transport buttons, Play. Stop, Fast Forward and Rewind, operate in another mode such as in Satellite, Cable and Audio modes. You can also make CHANNEL punch through, C-1 Programming: 1. Press PUNCH THROUGH in the LCD screen in 2. SYSTEMS & OPTIONS mode. 2.
You can add or delete buttons. change the button size and shape, move the button locations and edit the text on the buttons en LCD screen in the EDITING Mode. 1. Go into setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds. 2. Move down the cursor in the LCD screen to 5. EDIT BUTTONS using joystick. 3. Push down the joystick to enter the EDITING mode. The LCD will list the following six choices to choose from and select the button you wish to enter.
LCD ( 8. To Edit bellybuttons on rrr “ET exit from the main menu by pressing both the MAIN and PAGE buttons, simultaneously. NOTE: You may first relocate or delete the buttons that are currently at the position you plan to locate the new button. However, you can also relocate or delete the buttons after you superimpose the new button above them. The device buttons in favorite device page can be moved. Please refer Copy Create a Favorite Device Page” B.
5. Repeat Step 2 to Step 4 10 copy other device buttons you wish to store to your favorite device page. 6. Once you completed it, exit by pressing both the MAIN and PAGE button simultaneously. Note: You may also want to change the size and text of the buttons in the favorite device page using CHANGE and TEXT EDIT in EDIT mode. However, the text on the button should be written on the main device page before the device button is stored in favorite device. C.
8. To Edit ons on LCD D, To Insert Buttons This is designed (0 create new functional buttons in any of the twelve devices. INSERT The following choices of bunion sizes and shapes are available: (ome) (we) (eo) ree 1. Select INSERT button in EDITING mode. Select the device you wish to create as a new button. 3. Move to the page you wish to create a new button by pressing the PAGE button.
E. To Change Buttons This is designed to change the size and shape of any functional buttons and device buttons (in favorite device page) with the steps shown below: The following choices of buttons arc available: 1. Press CHANGE button in EDITING MODE. 2. 1f you wish to change the functional buttons, press the device that contains the functional button vou wish to change and then select the {functional button. If you wish to change the device buttons in the favorite device page.
F. To Edit a Text This is designed to write a new text on any of the buttons in the LCD screen with the following steps: TEXT The following choices of fonts are Easy EDIT available in two sizes for text editing: £ ABCDEFGHIJKLMNOPQ {| % & K=07@ Sat) (case) (Cv) vert) {VCR) (Aux (vent) (vent) (Aux) am) wa) MOVE CURSOR: MUTE BUTTON tm I. Select TEXT EDIT button in EDITING MODE. 2. 1 you wish to write on the functional buttons.
Enter the Setting mode by pressing both the MAIN and PAGE button simultaneously for five seconds. Move the cursor on the LCD screen © 6. SET DATE & CLOCK by using the joystick. Enter this mode by pushing the joystick down. CAST NTI ET : EXIT | EAR : 2000 up Press the selection vou wish to change from the LCD screen and change them using the UP and DOWN buttons. Nee you complete the setting. store them by pressing the SAVE button. 10.
You may need to align the LCD screen after you down load the program to the M-1000. Enter the Setting mode by pressing both the MAIN and PAGE button simultaneously for five seconds. Move the cursor on the LCD screen to I. TOUCH PAD ALIGNMENT with joystick. Press the joystick down to enter the mode. Align the screen by pressing the three points that appears on LCD one point at a time. @ Press Here (1) To Align LCD Screen: Press the three points using pencil tip. @ Press here (2) To Cancel: Press Main button.
