Order Number : GETEC-C1-16-468 FCC Part 15 subpart C Test Report Number : GETEC-E3-16-062 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: RF Remote Controller FCC ID.
HS-R200 Owner’s Manual Universal Remote Control, Inc. www.UniversalRemote.
R200 Owner’s Manual Welcome! Welcome to the world of HomeSet control and automation. Thank you for your purchase. Before operating the unit, please read this manual thoroughly, observe all safety precautions, and retain it for your future use. Online Help: http://www.homesethome.com/support-manuals/#manuals For downloads and frequently asked questions. Contact Support: HomeSet is a URC product sold through Authorized Dealers and location throughout the USA.
R200 Owner’s Manual Important Information and Safety Precautions HomeSet R200 Owner’s Manual Safety Precautions © 2016 Universal Remote Control, Inc. All rights reserved. The information in this manual is copyright protected. No part of this manual may be reproduced in any form without written consent from Universal Remote Control. For your safety, do not attempt to disassemble the R200 Remote Control. There are no user-serviceable parts inside.
R200 Owner’s Manual Introduction Your HomeSet R200 Remote Control works with the HomeSet C200 Control Hub for easy, handheld control, and automation of electronic components in your home (audio/video and home entertainment devices such as lights, thermostats, security systems, and more) to make life more enjoyable. The R200 is a wireless remote that is installed as part of a HomeSet system by your smart home professional.
R200 Owner’s Manual R200 Remote Control By using the R200, you gain two-way control of you connected devices. “Two-way” means that in addition to data being sent to an electronic component (such as a Nest Thermostat), data I also returned to your remote so you can see graphical information of current status, including the current temperature in the home and more. Adding the HomeSet Mobile App for Android™ and iOS devices provides the same two-way feature.
R200 Owner’s Manual Features and Benefits Enjoy the following features: ● Quick Connect Wi-Fi When picked up, the R200 connects to Wi-Fi within moments to control your home Audio/Video (A/V) systems and smart home devices. ● Control Smart Home Products with Ease HomeSet R200 provides an elegant way to control entertainment products plus smart home devices in and around your home. For example, you can check on the kids in the backyard and turn on outside lights at dusk from your remote.
R200 Owner’s Manual What’s Included in the Box The following are the parts and pieces of the R200 remote: 1. R200 Remote Control 2. AC Power Adapter 3.
R200 Owner’s Manual Notice Before Getting Started Keep in mind the following: ● Designed for use on your local wireless network The HomeSet R200 Remote Control is designed for use on your wireless network similar to how your phone, tablets, or computers work. Used in conjunction with a HomeSet C200 Base Station, the R200 can also control your home’s A/V devices.
R200 Owner’s Manual Notice To Get Started Installing ● Inserting the Lithium Polymer Battery Press the spring lock down to unlock and remove the battery cover. A battery is included in the box. Place the battery into the battery compartment, making sure to align the contacts on the battery to the contacts on the R200. The battery snaps into place when aligned properly. Replace the cover. ● Using the Micro USB Charger Plug the micro USB charger into a power outlet and into the bottom of the R200 Remote.
R200 Owner’s Manual Setup and Using the R200 The R200 Remote’s Home Menu pages have buttons that allow you to navigate menus to perform setup of HomeSet and the R200 Remote. While this section goes into the Professional Installer’s setup, many of the same buttons are used for daily operation. The Home Menu pages display activities and devices in the system. Press the Home page button to view activities and devices. Navigate the home page by using the Up and Down navigation buttons.
R200 Owner’s Manual Displaying the Settings Screen Enter the Settings menu by pressing and holding the Home and Enter (ENT) buttons for three seconds. Use the Up and Down navigation buttons to navigate between the Settings Items. To select, press the button on the side of the LCD screen or the Select button when a line item is highlighted. To go back a step or to get out of the Settings menu, press the Home button.
R200 Owner’s Manual The screen displays network information about your R200 and the wireless network where it is connected. In this screen you’re able to scan for Wi-Fi network, select a network to connect to and enter any custom settings required. After connecting the HomeSet C200 Control Hub to the local network, select the “Base Station” (see below) setup item which results in display of the available C200 Hubs within the home.
R200 Owner’s Manual Your HomeSet system also includes the ability to add an optional URC TRF-ZW Z-Wave Gateway. This enables control of Z-Wave enabled products such as lights, thermostats, door locks, and more. If this is included in the system, there is a user accessory account setup that will be performed by your installer as shown here. Accessory Account info item allows the entry of an TRF-ZW Z-Wave account username and password.
R200 Owner’s Manual You can adjust the amount of time the LCD remains ON when the remote is not in use. The time can be set independently base on whether the remote is using battery power or connected to the Micro USB Charger. Selecting an item on this screen allows for the setting of each Sleep Timer value. Once the Sleep Timers are adjusted, press the Save button. Pressing the Go Back button reverts to the remote control’s last saved setting.
R200 Owner’s Manual Selecting Brightness results in the display of a screen that allows for setting brightness of the R200’s LCD Screen. Adjust screen brightness by pressing the adjacent hard buttons to increase or decrease the brightness level. Once the brightness is adjusted, press the Save button. Pressing the Go Back button reverts to the remote’s last saved settings. Note: The System Information screen displays data about your R200’s Operating System and Memory, along with other information.
R200 Owner’s Manual You can adjust the brightness of the LEDs that backlight the LCD screen buttons of the R200. This can save R200 power. Press the adjacent hard buttons to increase/decrease button light level. Once the LCD screen button light is adjusted, press . Pressing the button reverts the remote’s last saved setting. You can display the remaining battery level by selecting Power. You can also adjust when the Low Battery warning screen appears. Once power is adjusted, press .
R200 Owner’s Manual You can adjust button sounds of the R200. Press the adjacent hard buttons to increase/decrease button volume level. Once sound is adjusted, press Save. Pressing Go Back reverts to the remote’s last saved settings. You can set the R200 to turn on when the remote is picked up. Simply select , , or (Turn ON) or . After Pickup has been adjusted, the System Menu is displayed again.
R200 Owner’s Manual Selecting Firmware Update results in display of a screen that checks for a firmware update for the R200 Remote and C200 Hub (if necessary). If a firmware update is available, the below screen is displayed. Selecting Yes starts the firmware update process. Selecting No results in display of the R200 System Menu. If a firmware update is not available, the screen below displays.
R200 Owner’s Manual Factory Default WARNING! Selecting this button resets the memory of the HS-R200 to factory settings. Selecting Yes sets the R200 to factory default. Selecting No returns the R200 to the Setup Menu screen. Exit When you’ve finished adjusting Settings, simply press Exit to return to normal operation.
R200 Owner’s Manual Please refer to the URC complete Limited Warranty: www.HomeSetHome.com/limited-warranty-statement/ This Limited Warranty is valid only in the United States of America.
R200 Owner’s Manual ● ● ● ● ● ● ● ● ● Size: 8.74” H x 2.087” W x 0.984” D Weight: 6.1 oz LCD: 2 inch Screen (240 by 320) LCD Backlighting by LED Devices: Supports up to 255 Devices with text less with heavy graphics Usage Pages: Supports up to 255 Pages on each Device with text, less with heavy graphics usage Macro Capability: Up to 255 steps each, however, nesting is allowed Wi-Fi: IEEE 802.
R200 Owner’s Manual Changes/modifications not expressly approved by URC could void user’s authority to operate the equipment. URC is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
