Order Number : GETEC-C1-16-467 FCC Part 15 subpart C Test Report Number : GETEC-E3-16-060 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: BASE STATION FCC ID.
HS-C200 Owner’s Manual Universal Remote Control, Inc. www.UniversalRemote.
C200 Owner’s Manual Welcome! Welcome to the world of HomeSet control and automation. Thank you for your purchase. Before operating the unit, please read this manual thoroughly, observe all safety precautions, and retain it for your future use. Online Help: http://www.homesethome.com/support-manuals/#manuals For downloads and frequently asked questions. Contact Support: HomeSet is a URC product sold through Authorized Dealers and location throughout the USA.
C200 Owner’s Manual Important Information and Safety Precautions HomeSet C200 Owner’s Manual © 2016 Universal Remote Control, Inc. all rights reserved. The information in this manual is copyright protected. No part of this manual may be reproduced in any form without written consent from Universal Remote Control. Universal Remote Control SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL, OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. This book is intended for use by the homeowner or system user.
C200 Owner’s Manual Introduction Your HomeSet C200 Control Hub lets you easily control and automate electronic components in your home (audio/video and home entertainment devices such as lights, thermostats, security systems, and more) to make life more enjoyable. The hub does this by sending coded infrared and Ethernet commands wirelessly or wired using wires installed by your smart home professional.
C200 Owner’s Manual HomeSet C200 Control Hub The C200 Hub is a network-based product that requires the use of an installed local area Wi-Fi network (LAN). For handy reference, we suggest you record the name and contact information of the professional who installed your system on the notes section on the last page of this manual.
C200 Owner’s Manual HomeSet R200 Remote Control (Optional) Using a HomeSet R200 Remote Control with a C200 Hub allows for control of smart home products such as lights, thermostats, and security as well as control of you audio and video (A/V) devices. The R200 is a Wi-Fi based remote control and does not use “line of sight” infrared (IR) or low frequency RF. It’s the perfect accessory companion for your television room or bedroom.
C200 Owner’s Manual HomeSet Android and iOS Mobile App (Included) When used with the C200 Hub, the HomeSet “Entertain” Android and iOS Mobile Apps provide full control of A/V components, without need for a “point and shoot” IR remote control. The mobile app also provides advanced Internet Protocol (IP) command/control of network-based equipment.
C200 Owner’s Manual Features and Benefits Enjoy the following key features: ● Connect with Wi-Fi or Wired Ethernet Your professional installer/programmer connects the C200 Hub to a wired or wireless Ethernet network. The Wi-Fi capability of the C200 provides installation flexibility. ● Control Smart Home Products with Ease HomeSet provides an elegant way to control entertainment products plus smart home devices in and around your home.
C200 Owner’s Manual What’s Included in the Box: The following comprise of the parts and pieces of the C200: 1. C200 Control Hub 2. AC Power Adapter/12 Volt 1000 mA Power Supply 3. Ethernet Network Cable 4. Five (5) Standard IR Emitters 5. One (1) Wall Mount Plate with Four (4) Mounting Screws.
C200 Owner’s Manual Before Getting Started Keep in mind the following: ● Designed for use on your local wireless network, the C200 Hub is designed for use on your local wired or wireless network, much in the same way your tablets or computers do. ● By adding an optional R200 Remote or the HomeSet Mobile App on smart devices, the hub controls your home’s A/V products. Add an optional TRF-ZW Z-Wave Gateway to control your home’s Z-Wave lights, thermostats, door locks, and more.
C200 Owner’s Manual Notice Front Panel Some of the following sections contain information that is useful to the professional installer/programmer who installed your system. It’s not necessary for you to learn the details; however, we recommend you read them to be aware of the functions and capabilities of your HomeSet system. The front panel of the hub houses an IR “blaster”. The front panel blaster sends IR commands to components in the same cabinet or in line-of-sight of the hub.
C200 Owner’s Manual Rear Panel IR Outputs The rear panel of the hub houses five (5) infrared emitter ports, allowing for control of any A/V device normally controlled by a simple “point and shoot” IR remote. Self-adhesive “flashers” (included) affix to the front of your TV, Blu-ray player, and other equipment where there is an IR “window”. Thin wires connect flashers to the IR output ports, show below.
C200 Owner’s Manual Ethernet LAN Connection/Wi-Fi A standard Ethernet LAN connection port is provided for a wired connection to a local network via included Cat5 cable. The C200 also supports a wireless Ethernet (Wi-Fi) connection to the same local network used for Internet access. Controlling Other Network Devices (IP Control) The C200 Hub can also control other IP-compatible equipment connected to the same local network.
C200 Owner’s Manual DC Power Input The C200 is powered by an AC power adapter that plugs into the input port shown below. The power supply is a 12 volt, 1amp supply. Use only the AC Adapter supplied with the unit in all circumstances.
C200 Owner’s Manual Top Panel The top panel of the hub features three LED indicators that display the status of the C200. Power LED This LED illuminates blue when DC power is applied.
C200 Owner’s Manual Status LED The C200 status LED has six (6) possible states: Blue LED: illuminates blue when the hub is connected to the HomeSet server and fully programmed to control your home system. Blinking Red LED: blinks red when the hub cannot connect to the HomeSet server. Please check your network connections. Red LED: illuminates red when the hub is connected to the HomeSet server, but has not yet been programmed to control your home system.
C200 Owner’s Manual Wi-Fi LED The C200 Wi-Fi LED has six (6) possible states: Blue LED: illuminates blue when hub is connected to your network via a Wi-Fi signal, with excellent signal strength. Red LED: illuminates red when the hub is connected to your network via a Wi-Fi signal, with poor signal strength. Green LED: illuminates green when the hub is connected to your network via a Wi-Fi signal, with good signal strength.
C200 Owner’s Manual Bottom Panel Rest Button A single, momentary press of the Reset button REBOOTS the C200 Hub, similar to removing and then reapplying the DC power source. DO THIS ONLY IF INSTRUCTED TO DO SO BY YOUR INSTALLER OR BY HOMESET TECH SUPPORT. Pressing and holding the Reset button for ten (10) seconds results in setting the hub to “factory default”. All user data and programming will be erased and your system will not operate until reprogrammed.
C200 Owner’s Manual MAC Address Stickers Two (2) MAC address stickers are provided and are located on the bottom panel of the C200 Hub. MAC stands for “media access control”. This unique address is used to identify your hub on the network and on HomeSet’s cloud server. WPS Button A WPS button is provided, allowing the hub to be installed on a Wi-Fi network using the “WPS” method (Wi-Fi Protected Setup). This control is used by your professional installer.
C200 Owner’s Manual Removable Mounting Plate A removable mounting plate and four (4) mounting screws are provided and can be used to mount the hub to a flat surface such as a ceiling, wall, or entertainment center.
C200 Owner’s Manual Network Installation The C200 Hub can be installed using a Wi-Fi wireless Ethernet connection or via traditional hard-wired Ethernet connection. When installing the hub for the first time, your installer must perform one of the two following steps: ● Connect the hub to your wireless access point by using the WPS button on the hub and the one on the wireless access point.
C200 Owner’s Manual When the Status LED illuminates red, use an R200 remote to set the network properties of the C200 Hub. Note that the HS-R200 Remote Control is required to be on the same local Ethernet network as the hub to set the network properties of the hub. An R200 is required for setup but not required in a HomeSet system for daily use. To set the network properties of the hub, insert the battery into the remote control and follow the screen prompts.
C200 Owner’s Manual Limited Warranty Statement and Disclaimers Please refer to the URC complete Limited Warranty: www.homesethome.com/limited-warranty-statement/ This Limited Warranty is valid only in the United States of America. Any URC/HomeSet equipment that is purchased from an unauthorized source will not be eligible for a) Technical Support or support of any kind from URC/HomeSet b) Any Warranty by URC/HomeSet.
C200 Owner’s Manual Specifications ● IR Range (line of sight via IR): 30 to 50 feet, depending on the environment. ● IR Port: 5 available rear ports ● Macro Capability: up to 255 steps each ● Wi-Fi: IEEE 802.11 b/g/n ● Size: 1.2” H x 3.99” D x 5.13” W ● Weight: 5.4 oz ● Memory: DDR2 SDRAM 256MB ● Power: 12V DC 1A Updating HomeSet features and hardware may be updated from time to time. Manual HomeSet software and/or hardware updates should only be performed by your authorized HomeSet installer/programmer.
C200 Owner’s Manual Federal Communication Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
C200 Owner’s Manual Your HomeSet C200 Notes Page ● Custom Installer/Programmer Company Name, Email & Contact Info: ● HomeSet C200 Serial Number: ● Date of Installation/Programming Completion
