Datasheet

1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail]
1
AHM Series
Dual stage medical grade EMI Filter
(continued)
These series range of double stage
filters with low leakage give superior
performance when used in applications
with low Impedance loads controlling
pulsed, continuous and intermittent
interference noise and where high levels
Of mains borne interference are present.
FEATURES
•Doublestagefilter
•LowLeakage
•SuperiorPerformance
•Chassismounting
•Highconductedattenuationperformance
APPLICATIONS
•MedicalEquipment
•DiagnosticEquipment
•LowLeakageApplications
•XrayMachines
•MRI
CHARACTERISTICS
SERIES SPECIFICATIONS
Max. Cont. Oper. Voltage
250VAC
Operating Frequency
50/60Hz
Current ratings
1A to 50A @40°C
High Potential test voltage
L to G 2120Vdc for 1 Minute; L to L 1414Vdc for 1 Minute
Design
corresponding to UL 60939-3, CSA 22.2 No.8-13 and IEC 60939
Overload Capability
135% of Rated current for 15 min.
Flammability
corresponding to UL 94 V-0
Temperature range
-25°C to +85ºC
Climatic Category
25/85/21
Recommended Torque (Nm)
M5: 1.0-2.0; M6: 1.25 – 2.5; M8: 2.5-5; M10: 3.5-7
Rated
Standard current Termination Weight
Part No. @40°C Tab Screw (g)
AHM-01 1A 6.3 x 0.8 125
AHM-02 2A 6.3 x 0.8 125
AHM-03 3A 6.3 x 0.8 170
AHM-06 6A 6.3 x 0.8 170
AHM-10 10A 6.3 x 0.8 170
AHM-15 15A 6.3 x 0.8 260
AHM-20 20A M5 650
AHM-25 25A M5 650
AHM-30 30A M5 650
AHM-35 35A M5 1000
AHM-40 40A M5 1000
AHM-50 50A M6 2000