Datasheet

1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail]
1
AHL Series
Low-frequency Single-phase
Dual-stage EMI Filters
(continued)
These series range of double stage filters
give superior performance when used in
applications with low Impedance loads con-
trolling pulsed, continuous and intermittent
interference noise and where high levels of
mains borne interference are present.
Filter with additional differential mode
rejection in low frequency. For use with
switched mode power supplies to reduce
noise from power supply back into the
mains. Filter also provides good attenuation
of incoming interference
FEATURES
•Doublestagefilter
•MedicalVersionavail-
able
•SuperiorPerformance
•Chassismounting
APPLICATIONS
•PowerSystems
•ElectronicEquipment
•Frequencyconvertors
•Steppermotordrives
•UPS/Inverters
CHARACTERISTICS
SERIES SPECIFICATIONS
Max. Cont. Oper. Voltage
250VAC
Operating Frequency
50/60Hz
Current ratings
1A to 50A @40°C
High Potential test voltage
L to G 2120Vdc for 1 Minute; L to L
1414Vdc for 1 Minute
Design
corresponding to UL 60939-3, CSA 22.2
No.8-13 and IEC 60939
Overload Capability
135% of Rated current for 15 minutes
Flammability
corresponding to UL 94 V-0
Temperature range
-25°C to +85ºC
Climatic Category
25/85/21
Recommended Torque (Nm)
M5: 1.0-2.0; M6: 1.25 – 2.5; M8: 2.5-5; M10:
3.5-7
INSERTION LOSS
Rated Leakage
current current (mA) Termination Weight
Part No. @40°C @250VAC/50Hz Tab Screw (kg)
AH-L01 1A 0.34 6.3 x 0.8 0.125
AH-L02 2A 0.34 6.3 x 0.8 0.125
AH-L03 3A 0.34 6.3 x 0.8 0.17
AH-L06 6A 0.34 6.3 x 0.8 0.17
AH-L10 10A 0.34 6.3 x 0.8 0.17
AH-L15 15A 0.34 6.3 x 0.8 0.26
AH-L20 20A 0.73 M5 0.65
AH-L25 25A 0.73 M5 0.65
AH-L30 30A 0.73 M5 0.65
AH-L35 35A 0.73 M5 1
AH-L40 40A 0.73 M5 1
AH-L50 50A 0.73 M6 2
-30
-50
-10
-40
-60
-20
-70
-80
-90
Start 30.00kHz Stop 30.00MHz
-30
-50
-10
-40
-60
-20
-70
-80
-90
Start 30.00kHz Stop 30.00MHz
-30
-50
-10
-40
-60
-20
-70
-80
-90
Start 30.00kHz Stop 30.00MHz
1A
2A
3A
6A
10A
15A
20A
25A
30A
40A
50A