Datasheet

1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail]
1
AG Series
Single Phase EMI Filters
(continued)
These series range of General Purpose filters
are designed to suppress undesirable electri-
cal disturbances in Power Lines. They limit
the amplitude of interfering voltages on AC
power lines and prevent them from propagat-
ing into or out of the filtered equipment.
FEATURES
•RatedCurrentupto100A
•MedicalVersionavailable
•HighConductedattenuationperformance
•Chassismounting
APPLICATIONS
•PowerSystems
•ElectronicEquipment
•Frequencyconvertors
•Steppermotordrives
•UPS/Inverters
CHARACTERISTICS
SERIES SPECIFICATIONS
Max. Cont. Oper. Voltage
250VAC
Operating Frequency
50/60Hz
Current ratings
1A to 100A @40°C
High Potential test voltage
L to G 2120Vdc for 1 Minute; L to L 1414Vdc for 1 Minute
Design
Corresponding to UL 60939-3, CSA 22.2 No.8-13 and IEC 60939
Overload Capability
135% of Rated current for 15 minutes
Flammability
corresponding to UL 94 V-0
Temperature range
-25°C to +85ºC
Climatic Category
25/85/21
Recommended Torque (Nm)
M5: 1.0-2.0; M6: 1.25 – 2.5; M8: 2.5-5; M10: 3.5-7
Rated Leakage
current current (mA) Termination Weight
Part No. @40°C @250VAC/50Hz Tab Screw (kg)
AG-001 1A 0.34 6.3 x 0.8 0.06
AG-002 2A 0.34 6.3 x 0.8 0.06
AG-003 3A 0.34 6.3 x 0.8 0.06
AG-006 6A 0.34 6.3 x 0.8 0.06
AG-010 10A 0.34 6.3 x 0.8 0.06
AG-015 15A 0.34 6.3 x 0.8 0.125
AG-016 16A 0.34 6.3 x 0.8 0.125
AG-020 20A 0.34 6.3 x 0.8 0.260
AG-025 25A 0.73 M5 0.6
AG-030 30A 0.73 M5 0.6
AG-035 35A 0.73 M5 0.6
AG-040 40A 0.73 M5 0.6
AG-050 50A 0.73 M6 1
AG-060 60A* 0.73 M6 1
AG-075 75A* 0.73 M8 2
AG-080 80A* 0.73 M8 2
AG-100 100A* 0.73 M10 2
*Not covered under CSA