Installation Guide

Shock absorber for Ducati Monster

DU 125

Mounting Instructions

Note! 1

Please note that there can be small dierences

between your product and the images in

these instructions.

Note! 1

Please note that during storage and transport,

especially at high ambient temperature, some

of the oil and grease used for assembly may

leak and stain the packaging. This will not cause

damage to the product, wipe o the excessive

oil or grease with a cloth.

Note! 1

Before you install this product, check the kit

contents. If anything is missing, please contact

an Öhlins dealer.

Warning! ⚠

Before you install this product, read the Öhlins

Owner’s manual. This product is an important

part of the vehicle and the vehicle stability.

Kit Contents

Description Part No Pcs

Shock absorber DU 125 1

Bracket 01082-17 1

Reservoir bracket 03102-21 1

Screw M6x14 00382-16 1

Screw M6x12 01046-36 2

Screw M6x20 05404-03 2

Tie-rap 00231-01 2

Sticker “Memo notes” 01180-01 1

Sticker set 10207-01 1

Owner´s manual 07241-02 1

PAGE 1
Kit Contents Description Part No Pcs Shock absorber DU 125 1 Bracket 01082-17 1 Reservoir bracket 03102-21 1 Screw M6x14 00382-16 1 Screw M6x12 01046-36 2 Screw M6x20 05404-03 2 Tie-rap 00231-01 2 Sticker “Memo notes” 01180-01 1 Sticker set 10207-01 1 Owner´s manual 07241-02 1 1 Note! 1 Note! Please note that there can be small differences between your product and the images in these instructions. Before you install this product, check the kit contents.
PAGE 2
MOUNTING INSTRUCTIONS ⚠ Warning! We strongly recommend to let an Öhlins dealer install this product. 2 9 ⚠ Warning! If you work with a lifted vehicle, make sure that it is safely supported to prevent it from tipping over. 8 1 Note! When you work with this product, see the vehicle service manual for vehicle specific procedures and important data. 1 Note! Before you install this product clean the vehicle.
PAGE 3
MOUNTING INSTRUCTIONS This page intentionally left blank 3
PAGE 4
ADJUSTMENTS Spring preload adjuster ⚠ Warning! Before you ride/drive, always make sure that the setup is according to the recommended setup data. Read about adjustments and setting up in the Öhlins Owner’s Manual before you make any adjustments. Contact an Öhlins dealer if you have any questions about setting up. Compression damping adjuster Rebound damping adjuster SETUP DATA Recommended Free sag and Ride height Length 293.