Owner manual
Assembly Notes:
During assembly, hand tighten screw only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this table as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Model CLT24RD / CLT24SQ / CLT30RD / CLT30SQ Café Height Table
D
Large Allen Wrench
1 Unit
C
Small Allen Wrench
1 Unit
K
Table Top
1 Unit
H
Center Post
1 Unit
I
Top Support Plate
1 unit
J
Leg Supports
4 Units
F
Center Post Cap
1 Unit
G
Leveling Glides
4 Units
E
Leg Post Caps
4 Units
B2
Top Screws
4 Units
B1
Loctite Screws
8 Units
A
Post Screws
2 Units
1
1
Assembly Instructions
Note: Loctite Screws are coated in blue Loctite to prevent loosening.
Please read all instructions before assembly.
Step 1a: Attach Leg Supports (J) to Center Post (H) with Loctite
Screws (B1), using small Allen Wrench (C).
Step 1b:
Attach Center Post Cap (F) to bottom of Center Post (H).
Step 1c: Attach Leg Post Cap (E) and Leveling Glides (G) to
Leg Supports (J).
Step 2:
Attach Table Top Support Plate (I) to Center Post (H) with
Post Screws (A), using Large Allen Wrench (D).
Step 3: Attach Table Top Support Plate to bottom of Table Top (K)
with Top Screws (B2), using Small Allen Wrench (C).
Parts Listing
01.06.2014
2
H
I
A
J
G
E
J
F
1
B1
H
3
B2
H
I
K
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice) 919-362-4765 (fax)
919-303-6389 (voice) www.ofminc.com
support@ofminc.com