User Manual

Ex1
Hx1
Ix4
3 Units
1 Unit
2 Units
4 Units
1 Unit
M6x45mm Screw
5 Units
6.5*18*1.5mm Washer
4 Units
M6x30mm Screw M6x14mm Screw
Crossed Metal
Semi-Assembled Legs
Semi-Assembled Legs
Model 161-P18A Plastic Dining Chair 4PK
Step 1: Attach two Semi-Assembled Legs(B,C), using one M6x14mm Screw(E) and one
6.5*18*1.5mm Washer(H) as shown.Tighten with M6 Allen Key(J).
Step 2: Attach two Semi-Assembled Legs(B,C) to Chair Back(A), using two M6x14mm Screws
(E) two M6x45mm Screws(G) and four 6.5*18*1.5mm Washer(H) as shown.Tighten with
M6 Allen Key(J).
Step 3: Attach Crossed Metal (D) to Semi-Assembled Legs(B,C) , using four M6x30mm Screws
(F) as shown.Tighten with M6 Allen Key(J).
Step 4: Tear off the backing of the Floor Protector(I) firstly and paste the four Floor Protector(I)
on the Semi-Assembled Legs(B,C) as shown.
250
13mm Allen Wrench
1 Unit
C
B
Gx2
J
Ex2
Hx4
J
J
D
A
26.12.2018
1 Unit
M6 Allen KeyFloor Protector
x4
F