User Manual

8
Specifications
ELECTRICAL SPECIFICATION
Input
Input voltage
24V DC, 10A max.
HV Output
Output voltage (V
MAX
)
Model dependent
900V or 1000V in standard models, other on
request
Load capacitor
External (not included)
For example, 33uF/1000V or other on
customer’s choice
Output power
>100J/s
Flashlamp
Flashlamp
External (not included)
For example, FG 1901 MTC3D(H) by
Excelitas or similar
Triggering
Triggering method
External only
Trigger capacitor
400V/470uF by default, other on request
Trigger transformer
External (not included)
For example, ZS1031-11(H) by Excelitas or
similar
Pulse
Pulse width
Not regulated, defined by flashlamp and
wiring inductance only
Pulse repetition rate
From single shot and up to 20Hz
Protections
From overheating
Door-interlock protection
Safety discharge resistor – 200kOhm
Cooling
Passive at small output power
Forced air cooling with external fan might
be needed at full output power
Environmental
Operating temperature
+10…+40C, non-condensing
MECHANICAL SPECIFICATION
Size (LxWxH)
94x82x40mm (see also the dimensional
drawing below)
Weight
Approx. 0.2 kg