User Manual

2
Overview
FLD-nano is a compact but powerful flashlamp driver designed for air-
cooled flashlamps similar to the depicted below.
Driver charges the external capacitor bank up to required voltage and then,
following the external TTL signal, initiates the discharge by applying the
trigger pulse (400V by default) to the flashlamp.
FLD-nano requires +24 V DC power supply and pulse generator to set an
operating frequency.
An output voltage level can be programmed in working range by user either
manually (through onboard configuration trimpot) or remotely (applying a
DC voltage to the respective pin). The driver maximal output power could
be decreased, if needed, by on-board trimpot.
Applications:
• UV polymerization
• UV sterilization
• Sintering
• Annealing
• Stroboscopy
Main parameters:
• 24V DC input
• 100 W average output power
• Up to 1000 V output voltage (to the capacitor bank)
• External triggering, no simmer