The Architectural Loudspeaker: Preference ®
Certain fine loudspeakers in the audio industry become benchmarks of sound quality or reference standards by which authoritative industry experts judge all others. Today's Preference® for Music and Home Theater Preference ® architectural loudspeakers are the new mark of excellence. You will find no greater value.
PlasmaView 16:9 HDTV Plasma Monitor The Preference ® Accurate Imaging Baffles (AIB) utilize a ribbed design, which contribute strength and rigidity factors to the baffle, thereby simultaneously eliminating "baffle flexure" and the "early reflections" from the drivers, which smear the three-dimensional acoustic imaging of In-Wall loudspeakers.
K-602 K-625 6 1/2" 2-way rectangular Frequency response: 42 Hz - 21kHz Power handling: 50 watts nom. 100 max. Sensitivity: 90dB 1 watt / 1 meter 8 Ohm nominal Overall dimensions: 9 1/16" W x 12 3/4" H Cut-out: 8" W x 11 3/4" H x 3 1/4" deep Pre-construction bracket: RIB-62 Pre-const. bracket with Vapor Dome: tba 6 1/2" 2-way round Frequency response: 42 Hz - 21kHz Power handling: 50 watts nom. 100 max.
IR Receiver Knockouts Tetoron® Soft Dome Pivoting Tweeters The K-602, K-802 and K-5LCR rectangular in-wall loudspeakers feature a mounting provision for a remote control signal receiver behind the loudspeaker grille. This allows discrete integration with an infrared receiver/repeater system. These systems work with your standard IR remote controls to allow command of your entire system from any equipped room in your house.
Audiophile Videophile Reference Standard Architectural Monitor Loudspeakers Every Preference® model loudspeaker is "timbre-matched" ensuring sonic uniformity throughout the line. This means all models have been carefully engineered to have a family sound; this is also referred to as "voice matching". As special effects from movie soundtracks move about the room, timbre-matching ensures a consistent tonal balance throughout the sound space.
