Installation Guide

Arc-H-User-Manual-Universal-2020 (LD)-v3
ARC-H
Pad
Coil Center
ARC-H
3x cable clips
Power Adapter
Contents:
Attract magnets
ARC-H (LD) is designed for surfaces 20-50mm (0.78-2”) thick. However, for USA, FCC compliance requires ARC-H to be fitted to
worksurfaces 20-30mm (0.78-1.18”) only
Move guide to your
desired location
1 2
Metal Frame
35mm
(1.38")
35mm
(1.38")
35mm
(1.38")
45mm
(1.77" )
Cable Entry
Adjust to ensure correct
clearance and mark screw
holes
3
Place resonator pad where
magnet indicated
4
Fit ARC-H (LD) with tape (provided) or screws
5
Connect power and check for blue LED6
Place phone on the pad and charge
7
The ARC logo identifies the coil center which must be aligned with the resonator pad
Alignment
Magnet
Alignment Template
ARC-H (LD)
1 x Resonator Pad
Interchangeable plug attachments