V1.1.1 Table of Content Table of Content ........................................................................... 1 Safety Precautions ....................................................................... 2 Conformity .................................................................................... 5 Date Protection ............................................................................ 6 Listening Cautions........................................................................ 6 Support .....
Safety Precautions Do not subject the device to severe impact or drop it from heights. Do not use the device in extreme hot or cold, dusty or damp conditions. Do not expose it to direct sunlight. Avoid using the device near strong magnetic fields. Keep the device away from water and other liquids. In the event that water or other liquids enter the device, power off the product immediately and clean the device.
The battery (battery or batteries or battery pack) should not be exposed to excessive heat such as sunlight, fire or the like. Please follow responsible procedures for battery disposal. If the power adaptor is disconnected from the device, the device will remain operable as long as the battery has sufficient charge. The power adaptor is a CLASS II apparatus with double insulation, and no external ground is provided.
Note Please only charge the battery while the device is turned off. The charging time will be shorter and the lifetime of the battery will be enlarged. Please fully charge the battery before first use. Note Please note that the internal battery can only be replaced by qualified personnel. If necessary please contact to the ODYS customer service at www.odys.de. Disposal Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household waste in the EU.
Conformity We, Axdia International GmbH, hereby declare that this Android Tablet corresponds to the basic requirements and relevant regulations outlined in guideline 2014/53/EU, 2014/30/EU, 2014/35/EU. The CE declaration of conformity for this product may be found on the following link: https://www.odys.de/web/downloads_de.
Data Protection Basically, this device can be used without providing information about personal data to the Axdia International GmbH company. Your data will only be collected after you have contacted us by e-mail, telephone or via our website. In these cases, our privacy policy applies, which you can view at http://datenschutz.axdia.de/.
hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there. To establish a safe volume level: Set your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, without distortion. Listen for reasonable periods of time: prolonged exposure to sound, even at normally ‘safe’ levels, can also cause hearing loss. Be sure to use your equipment reasonably and take appropriate breaks.
Support http://www.odys.de support@odys.de On our website you will find the latest information about this product, other products of our enterprise, our company itself and valid warranty terms. The latter you will find under Service Downloads. Firmware upgrades for this device are also offered on our website. For questions or problems read our FAQs on our website or contact our after sales service. The product includes software components licensed under GNU General Public License (GPL).
Appropriate use Device is designed for playing music and video files in commonly used formats, showing photos and access internet functions using the build in Wi-Fi function. The use is designed on the usual Usage and service life of consumer electronics of this kind in the home. It is exclusively meant for this purpose and must only be used for the same. Important! This also includes paying attention to all information contained in this operating manual, especially in the safety instructions.
Firmware updates (OTA update) ODYS would like to offer an easy and most comfortable way to keep the operating system of your device up-to-date. Using this specially for ODYS Tablet PCs designed App, which you can download from the Google Play Store; you can easily update the system. The ODYS Update App is preinstalled at your ODYS Device. Select, if you would like to update manually or if the system update should be done automatically. Please note that updates improve the capability of that device.
Feature Summary Wi-Fi Connectivity With the latest Wi-Fi technology, this device can connect you to the Internet wherever you are. Touch Screen Touch or slide your finger on the screen, the screen responds instantly. Third-party Application Support With the built-in OS, you can install a large number of third-party applications in this device. Please note that you need to insert a Micro SD-Card for it. Built-in G-sensor The screen changes to landscape or portrait automatically when the device rotates.
Buttons & Ports 1. Rear camera 2. Volume key +/3. Power button 4. Front camera 5. Speaker 6. Micro USB Rear-facing camera for taking pictures. Press briefly to increase / decrease the volume level. Press and hold the [Power] button to turn on or off the device; briefly press the button to turn the screen on or off. Long press (15 sec.) to turn off the device if it freezes or behaves otherwise abnormally. Front-facing camera for taking avatar pictures.
7. Microphone 8. Headphone jack Sound output for headphones. Note: The built-in speaker is automatically deactivated when a headphone is connected. 9. Micro SD slot For use with standard Micro SD/SDHC memory card up to 256GB. Hint: Simultaneously press the On/Off key and the Volume-Minus-Key together for 2 seconds to take a screenshot of the current view.
Charging Battery The device has a built-in rechargeable battery. No extra battery installation is required. Just charge the device when it indicates low battery. To charge the battery, connect the device to any standard wall outlet via. the DC-IN port using the power adaptor. It takes about 5 hours to fully charge the battery. Note: a. We advise to use only the delivered power adapter with this tablet. b. You can operate the device even when it is being charged.
Installing Memory Card Insert the memory card in the card reader in the correct orientation as shown (). Make sure the micro SD card is aligned correctly, the contacts must point down towards the screen. Card and card reader can be damaged if the card is not inserted correctly. Carefully slide the card into the tray until it clicks into place. To remove the card, press the card a little into the card slot and it is unlocked. If the card is inserted correctly, look around 2mm out of the card compartment.
Transferring Files Before reading or playing files, you need to transfer media files from a computer to the device. (1) Connect the device to a computer with the supplied USB cable. (2) After connection, the connection is displayed as a notification at the top of the device. (3) Open the notification bar. Tap the Notification button for more information.
(4) Tap again to open the USB settings. (5) Activate the data transmission here. (6) The internal memory and a memory card, if inserted, are now available via the Explorer of a Windows PC, for example. Now you can copy files to or from this drive. (7) To end this action, disconnect the device from the computer.
Turning On/Off To turn on the device, press and hold the Power button until you see the boot-up screen then release. It may take a few minutes to start up the system, please wait before you proceed. To turn off the device, press and hold the Power button until you see the option “Power Off”, tap on “Power Off” and then tap on “OK”. Tip: This device will sleep with the screen off if it stays inactive for a few seconds. You can briefly press the Power button to turn on the screen and wake it up.
Home Screen a. System hints b. System settings c. Google apps d. Google Duo e. E-Manual f. Play store g. Camera h. Emails Informs the user if attached memory or updates are available and also provides other system status information. System data such as WLAN and battery status as well as the current time are displayed here.
i. Applications Wipe upwards across the screen to reveal all applications installed on your Tablet - You can copy the applications onto the Home screen by pressing and holding on their icons. - You can delete the application from the Home Screen by dragging their icons to the Cross that appears at the top of the screen j. Browser Tap to launch the Browser Chrome to visit your favorite websites k. Picture Gallery Google Photos l.
Status bar areas The status bar at the top of the screen is divided into two areas. 1. System hints Wipe from the upper edge towards the centre to open the bar. Here status information and system messages are diplayed. Caution! This view may vary and could show different or less elements at your device. .
2. System settings (Short select) Wipe the screen top down again to provide direct access to the most important system settings. System information’s like wifi and battery status and the current time will be shown here. Caution! This view may vary and could show different or less elements at your device.
Display all Applications The device supports most of popular third-party applications. It has many useful applications pre-installed, such as music player, video player, photo viewer, alarm clock, calculator, etc. Furthermore, you can add more applications to the device by installing them manually. To display all applications installed on your device, tap the Application Tab. Refer to the figure below.
Using the Touch Screen This device is equipped with a touch-screen. Following are a few tips on how to use the touch screen. Tip: For a proper usage please use your finger. Main Touch Screen Actions - In many applications, you can go back one level in the interface by tapping on the back icon (see below center of the screen). - Wherever you are in the interface, you can go back directly to the home screen by tapping on the home icon (see below center of the screen).
Other Touch Screen Actions When watching a video or listening to music, you can tap the progression bar to go directly to a different location in the video or song. You can also use your finger to drag the cursor in the progression bar to another location in the video or song. In the file browsers (File, Music, Video, Photo, etc.), you can drag your finger up and down to scroll the file list up and down.
Bluetooth Connection Your tablet is equipped with an integrated Bluetooth technology to enable your device be connected with other Bluetooth devices such as other tablets, mobile phones, headsets or Bluetooth keyboards. Pair other devices (1) Touch the icon for the „Settings“ on the home screen. (2) Tap on “Bluetooth” and if necessary activate the function by tapping on “OFF”. Bluetooth is “ON“ will be displayed. (3) Select the device that you want to pair from the list. (4) Follow the pairing wizard.
Access Internet - Wi-Fi Your tablet features built-in Wi-Fi technology so that you can access the internet via. Wi-Fi network. First of all, you need to configure a Wi-Fi network. For the Wi-Fi configuration procedure to work, you need to be in a Wi-Fi zone that will allow you to connect to it. Every time your tablet is in range of a network that you have already configured once, it will attempt to make a connection.
Manual WIFI Configuring 1. In the apps list, tap on the Settings icon. 2. Tap on “Network&Internet”. 3. Tap on “Wi-Fi”.
4. Activate the function by tapping on “OFF”, if necessary. “Wi-Fi ON” is displayed. 5. Your device automatically scans and displays available wireless networks. The list of available networks shows all wireless networks within range of your device. Note: The available network list is constantly refreshed automatically. When the Wi-Fi is enabled, Your Tablet will connect automatically to your configured networks when they are in range.
6. Tap on the network you want to connect to, enter the required network information (password) and then tap on “Connect”. Your Tablet will now attempt to establish a connection to that WiFi hot spot with the network parameters you entered. If the connection is successful, the message Connected to XXX will appear under the WIFI setting. Advanced Connection To manually scan for available Wi-Fi networks, in the “WIRELESS&NETWORKS” screen, tap the SCAN icon (at top right corner).
Launching the Web browser Tap the applications icon to display all applications, and then tap the browser icon to launch the web browser. If you are already connected to a network, the Web browser will simply open and you can start browsing the Web. Note: Not all wireless networks offer access to the Internet. Some Wi-Fi networks only link several computers together, without any Internet connection.
Virtual Keyboard Tapping on any text input field opens the virtual keyboard. Enter a website address or any required text with the virtual keyboard. a. Back-space b. OK / Enter Tabulator c. Shift d. Shift e. Switch between Numbers and Characters f. Space bar g. Change keyboard layout h. Close keyboard Special character Some or the keys provide the possibility to enter special character. (1) Press the corresponding key and keep pressing. (2) While pressing move your finger to the desired character.
Using the Web Browser You can scroll the screen up and down by tapping on the page and dragging it up or down (be careful not to tap a link until you are ready!). To open a link, simply tap it. You can open several web pages at a time, view them all at once on the screen, and then tap one of them to view it in full screen.
Web browser options While a Web page is prompted press the menu key right corner, to open the browser settings. New tab New incognito tab Bookmarks History Downloads Desktop-Version Settings Help and Feedback at the top Opens a new tab. Opens a new tab that will not be saved in the history. No cookies will be created. Edit your bookmarks. Displays the last visited websites. Gives an overview about all downloaded files. The website will be displayed like on a computer.
Photo Playback Tap on the app icon to access all apps and tap on the photo icon to launch the photo folder. Thumbnails The first screen in photo mode shows all photos/videos and sub folders in the device or on memory card as thumbnails. Tap on a photo thumbnail to view the photo in full screen mode. Open the sub folder if the photo is stored in a sub folder to display the photo/video contents as thumbnails.
View Photo Back to previous view Share image Edit image Image Information Erase image While viewing photos tap on the screen to show the status bar at top and bottom. Press the menu button or tap on the respective icon ( ) in the top right corner and then on “Slide Show” to start the slide show. Tap on the screen again to end the slide show. Wipe with your finger to the left or right over the image to display the previous/next photo.
Manage Third-party Applications Your tablet provides support to many useful third-party applications. You can purchase the applications to add more functions to your device. They are available online at the Internet or directly on your product. Pre-installed Applications The device has pre-installed applications when it was manufactured. You can see them by tapping Application Tab. They are video player, audio player, photo browser, calculator etc.
Uninstall Applications (1) Tap the Settings shortcut in the Home Screen to display all system settings. (2) Select “Applications”. (3) Tab on the application that you want to uninstall. (4) Tab on “Uninstall” to uninstall the application. Note: You cannot uninstall the pre-installed applications. Some of the applications developed for mobile phones might not run properly in the Tablet. Please consult the respective software developer for further information or support.
System Settings On the Home screen tap on the “Settings” icon and select the desired category. Tap on the function to change the settings. Tap on the tick box on the right side of the parameter to enable this option. Wipe with your finger over the screen to display further settings outside the screen. After completing your settings tap on the icon to return to the setting menu or tap on the icon to return to the Home screen. Your changes are saved.
Connected devices Wirelessly pair your device with other devices via Bluetooth or to press or stream content. First select the desired connection setting, then tap "Pair new device". Apps & Notifications Recently opened apps Show all XX apps Notifications App permissions Standard apps Special app access Here you can see recently opened applications and can directly change their settings. If the desired app is not below, you can view all apps here.
Display Brightness Adjust the brightness of the screen. For selecting the background image. Button for creating a screenshot next to the on-screen buttons Setting the delay to autom. Shutdown and lock the screen. To turn it on again, press Power once, then press once again to release the key lock on the screen. Activate / deactivate auto screen rotating To change the font size in the menus. To change the display size of items.
Security & Location Settings for data backup, as well as for locking the device and sim card. Accounts Settings to create and sync with different accounts, such as email and Google, and to create and manage user profiles. Accessibility Configuration of accessibility. These include speech output, text and display customizations, and device behavior for some features. Google To manage and use Google services and settings.
Troubleshooting Touch screen does not respond Ensure that the app provides full touch screen support. Do not tap too hard on the screen; this can cause malfunctions. No sound from earphones Ensure that the volume setting is not too low and that the connection is ok. Ensure that the earphones are clean. Corrupted MP3 files can cause different noise or cannot be played. Ensure that the files are not damaged. Try different earphones.
Solve Wi-Fi connection problems 1. Open Wi-Fi settings. 2. Select and remove Wi-Fi. 3. Tick “Display Password” and enter password. 4.
No USB connection is established to the PC Check cable/plug connection to the PC, Windows system configuration and USB driver. Restart PC, remove and reconnect the USB cable, reinstall drivers. It is not possible to store anything at the inserted SD card Please confirm that the inserted SD card is not write protected. It is not possible to download e-books from odysbook.de. Please disable any popup blocker.
Specifications Configurations CPU 1,6GHz 64-bit Octa Core DDR 4GB DDRIII Ram Built-in operating Android 10.0 system IBM PC or compatible PC, Notebook or Hardware Macintosh with USB port Internal 64GB Flash Storage Memory Memory Card Micro SD card: up to 256GB(SDHC) System Requirements Operation Windows 7 and above MAC OS 10.4 or System above USB Interface USB2.0 High speed Features Output Port 3.5mm earphone port, built-in speaker Built in microphone E-book Format EPUB, PDF MP3 (MPEG1/2/2.
Technical Parameter MP3: 8～320Kbps Audio Bit Rate OGG: 16~320 Kbit/s WAV: 8~48 kHz AVI (Max.2160p); MP4 (Max. 2160p) Video MKV (Max. 2160p); MOV (Max. Resolution 1280x720) Max. 6Mbps (MPEG4, XVID, DIVX4/5/6); Max. 2.5Mbps (H.264, Real video Video Bit rate 8/9/10); Max. 2Mbps (Sensors H.263). Photo JPEG (Baseline) (Max.8000*8000), Resolution GIF(Static) (Max.1000*1000) 2,4 / 5GHz WLAN (802.11 ac/a/b/g/n) Network Bluetooth 5.
Storage Temp. Ambient Temp. Operation Relative Humidity Storage Relative Humidity -20°C ～ +65°C 0°C ～ +50°C 20% ～ 90%（40°C） 20% ～ 93%（40°C） Google, Android, Google Play and other marks are trademarks of Google LLC. Oreo is a trademark of Mondelez International, Inc. group. Maximum transmission power Function Channel Bluetooth 0 802.11b Wi-Fi 1 802.11n (HT40) 3 Wi-FiWi-Fi 802.11b 7 802.11n (HT40) 11 Wi-FiWi-Fi 802.11b 13 Bluetooth 39 Bluetooth 78 802.11ac 42 (80MHz)Wi-Fi 802.
License conditions Copyright (c) 2013 AXDIA International GmbH License terms of AXDIA International GmbH, hereinafter referred to as AXDIA: The firmware packages provided by AXDIA contain files that are made available under various licenses, especially one or various open source licenses (GNU General Public License, GNU Lesser General Public License, or FreeBSD License). AXDIA grants you the right to use the firmware packages, which are made available as object code format.
Warranty Conditions The following conditions comprise the requirements and scope of our warranty conditions and do not affect our legal and contractual warranty obligations. We offer a warranty on our products in accordance with the following conditions: 1. We will resolve damages or defects on our products free of charge within 12 months of the purchase date under the following warranty conditions.
3. The warranty claim does not apply if repairs or other work is carried out by unauthorized persons or if our products are equipped with additional parts or accessories that are not approved for our products. 4. Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product. 5.
Asserting a warranty claim 1. To make use of the warranty service, you must contact the AXDIA Service Center by e-mail, fax or phone (support@axdia.de). You can also use the service form on our website or on the back of the warranty conditions. 2. AXDIA Service Center will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and you will be asked to send the product to AXDIA.
Service outside of warranty AXDIA can refuse any service claim made that is not covered by the warranty. If AXDIA agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs. AXDIA will not accept any packages that have not first been approved by AXDIA by means of an RMA (Return Material Authorization). .
