Specifications

9
EN
Preparation of the Remote Control
Place the remote control on an even surface and insert the supplied button cell into
the remote control as follows.
1. Push the button toward right.
2. Pull the battery loader out.
3. Insert one “CR2025” size battery with the positive side (+) facing up.
4. Replace the cover.
The remote control operates on 1pc “CR2025” lithium battery
(included). To power up the remote control, remove the insulation
tab from the back of unit.
Cell data
Battery type: 1x CR2025 , 3 V
Service life: approximately 1 year (for normal use and room temperature)
Using Of Remote Control
Point the remote control towards the main unit when operating. The remote control works
best at a distance less than 3 m and at an angle of up to 30° to the front of the unit. No
obstacles may stand in the way between remote control and infrared sensor and do not
place the remote control in direct sunlight. If the remote control unit fails to work even when
it is operated near the player, replace the battery.
Notes on batteries
If the remote control is not used for a long period of time, please remove the
battery from the compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.