Datasheet

ODYS Multi Pocket TV 350
16
DE
8.1 DVB-T Installation – channel search
1. Switch on your Multi Pocket TV 350.
2. Press the „Menu" Key on the remote control.
3. Select the menu „Digital TV“ (DVB-T) using the key.
4. Press the „Enter“ Key to enter Digital TV.
5. Select the menu option „Installation“ using the keys and the Enter Key.
6. Select the desired search method for the channel search using the keys
and „Enter" Key.
7. It is strongly recommended to select the Option „Country scan “.
8. Press the „Enter“ Key to enter „ Country scan “.
9. Use the Keys to move between the country selections.
10. Use the Keys to move between the Area selections.
11. Highlight your desired Area setting using the Keys.
12. Press the „Enter“ key two times to start the channel search.
13. Use the „Return“ key to go back to the main menu.
Note
Whether and how many DVB-T channels may be received by the Multi Pocket TV
350 strongly depends on the operational area and the DVB-T signal strength.
DVB-T radio in particular is very limited and not available in most locations.
8.2 TV- Channel Selection
1
Press the MENU or Return Key to exit your current mode or to switch on the Multi
Pocket TV 350. The DVB-T Mode is the standard mode of the device and will start
automatically.
2
Use the number buttons 0-9 on the remote control to select the desired TV station.
3
Switch to the stored TV channels, going both forwards and backwards in
succession, using the  or CH+ and CH- buttons.
4
Set the suitable volume using the Vol+ und Vol- buttons.
5
Press the ENTER Key to open the short-key menu.