Information

• 4 x USB 3.0 Host ports (shares one single root hub)

• 1 x USB 2.0 OTG port for Host or Device mode. (No power

input)

• 1 x Debug serial console (UART)

• 1 x Peripheral Expansion Header (40-pin, 2.54mm pitch)

• 2x DC 5V, 2x DC 3.3V, 1x DC 1.8V, 8x GND

• 1x SPI

• 1x UART

• 2x I2C

• 6x PWM

• 2x ADC input (12bit, 1.8V Max)

• 25x GPIO (Max)

• 1x Audio Expansion Header (7-pin, 2.54mm pitch)

• 1x DC 5V

• 1x SPDIF out

• 1x I2S

• All 3.3V I/O signal level except for ADC input at max 1.8Volt.

• Quad-Core Cortex-A55 (2.016GHz)

• ARMv8-A architecture with Neon and Crypto extensions

• Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)

• Memory DDR4 4GiB with 32-bit bus width

• Data rate: 2640 MT/s (PC4-21333 grade)

• 1.2Volt low power design

• 1x eMMC connector (8/16/32/64GiB are available)

• 1x Micro SD slot (DS/HS mode up to UHS-I SDR104)

PAGE 1
• 4 x USB 3.0 Host ports (shares one single root hub) • 1 x USB 2.0 OTG port for Host or Device mode. (No power input) • 1 x Debug serial console (UART) • 1 x Peripheral Expansion Header (40-pin, 2.54mm pitch) • 2x DC 5V, 2x DC 3.3V, 1x DC 1.8V, 8x GND • 1x SPI • 1x UART • 2x I2C • 6x PWM • 2x ADC input (12bit, 1.8V Max) • 25x GPIO (Max) • 1x Audio Expansion Header (7-pin, 2.54mm pitch) • 1x DC 5V • 1x SPDIF out • 1x I2S • All 3.3V I/O signal level except for ADC input at max 1.8Volt.