Installation Guide

4
5
Solar Lens® Dome
(10” Dome shown)
Adjustable Tubes
Roof Flashing
(Composite flashing shown)
Ceiling Ring with Flip Tabs
PARTS
Low-Profile Insulated
Diffuser Lens Assembly
Carpenter Pencil
Claw Hammer
Coat Hanger Wire
Flat Pry Bar
Ladder
Metal Shears
Phillips Screwdriver
Plumb Line
Power Drill
Power Saw
Safety Equipment
Measuring Tape
Non-Curing/Non-Hardening
Roof Sealant (Not provided in kit)
Exterior Silicone
(Not provided in kit)
Formable Aluminum Flashing
(All pitched roof types - including
Metal, Tile, and Shingled
Applications)
Secondary Underlayment Flashing
(Required for use w/ Formable
Flashing)
Seamless Aluminum Flashing
(Flat Roof Applications)
Severe Weather Tube
w/ Seamless Aluminum Flashing
(Severe Weather Regions / Dade
County & Texas Gulf Coast
approved)
TOOLS
Read through the section specific to your roof for
additional parts and tools.
NOTE
Other Roofing
Applications
Section-iii
Tools & Parts Identification
(4) dome washers
(4) 3/4” dome screws
(9) 2” flashing screws
(9) flashing washers
(1) roll of foil tape
(2) hole cutting templates
Optional Formable
Aluminum Roof Flashing
Optional Spun Aluminum
Roof Flashing
(Non Formable)
Underlayment