Installation Guide

24
25
Metal Shears
Safety Equipment
Clear Plastic
Underlayment
TOOLS & PARTS
Cut a slit through the felt paper at the “3:00 and
9:00” positions. Be sure the slit is as wide as the
Clear Plastic Underlayment.
1
Slide the Clear Plastic Underlayment up through the
slit under the upper felt paper. Be sure the opening is
aligned with the cut hole. Remove any fasteners/nails
that obstruct the Clear Plastic Underlayment.
2
1
Slit Cut In
Felt Paper
Position The Clear Plastic Underlayment
Section-13c
Tile Roof Intallation
Using Formable Aluminum Flashing
2
2
Slide Plastic Flashing
Up Through Slit
Be sure opening is
aligned with the cut hole