Instructions / Assembly

Ladder

Pencil/Marker

Safety Equipment

Shim

Bottom Adjustable Tube

TOOLS & PARTS

Place bottom adjustable tube (blue label) (with the

ﬂanged end down) through the rough-cut hole in

the ceiling.

Guide the top portion of the tube up through the roof

ﬂashing so it protrudes upward through the ﬂashing

collar on the roof.

Place a temporary shim or ruler across the ceiling opening.

(Approx 1/8” thick)

Center the tube over the ceiling cut-out, resting the

tube down onto the shim. (The shim will keep the tube

from falling through the ceiling.)

Start with regular installation instructions beginning in Section 1.

On the roof, mark the protruding tube at the top of the

ﬂashing collar with a felt pen. This will indicate where the

extra length of tubing must be trimmed o for a short shaft

install.

The solar powered dimmer will not work with a cathedral

ceiling or some short installations due to space restrictions.

NOTE

Section-10a

Cathedral Ceiling/Short Shaft Installation