User Manual

11
With the "ridge" facing you and the logo on the bar
end right side up, slide bar back and over supports on
inside of cabinet.
1
Slide down to secure in place.
2
SUPPORT BAR – OPTION 1
Hooks are designed to hold light-weight objects.
Maximum load on support bar is 5 lbs.
Maximum load per hook is 1 lb.
NOTE
Installing to Hang Objects
The support bar can be installed as a hanger bar
with hooks to hang light-weight objects.
Lower hooks onto bar until they snap in place. Push
up to remove.
3
Hooks are designed to slide on the bar to desired
position.
4
Logo right
side up
Ridge
1
2
3
4
Lift and slide out to remove.
NOTE
Swinging metal objects have the potential to scratch
the cabinet back. Install a second support bar to prevent
objects from hitting cabinet back as shown. Order second
support bar separately.
TIP