Installation Guide

28
TOOLS & PARTS
Gloves
Formable Aluminum
Flashing
Clear Plastic
Underlayment
Top Adjustable Tube
2
1
3
Clear Plastic
Underlayment
Formable Aluminum
Flashing
Top Adjustable
Tube
4
Position the Formable Aluminum Flashing in place by
centering it’s opening with the hole cut into the roof
deck.
1
Centering is best achieved by inserting the reective
tube into the opening of the aluminum flashing letting
the fit of the tube-to-roof hole serve as a guide.
2
The uphill half of the Formable Aluminum Flashing
should be laying on top of the felt roofing paper,
while the downhill half of the flashing should be
laying on top of the downhill tiles.
3
Manually shape the downhill edge of the Formable
Aluminum Flashing to match the surface of the tiles.
4
You might nd it difcult contouring the Formable
Aluminum Flashing to fit the downhill tiles. Try shifting
those tiles further downhill to allow more aluminum to
work with. Or add a 2” shim to the roof deck so the
Formable Aluminum Flashing is angled to the roof rather
than parallel to it.
TIP
2” Shim To Help
Shape Flashing
(Not Included)
Position & Shape The Formable
Aluminum Flashing
Section-13f
Tile Roof Intallation
Using Formable Aluminum Flashing